Clear cluster voting config exclusions Added in 7.0.0

DELETE /_cluster/voting_config_exclusions
Api key auth Basic auth Bearer auth

Remove master-eligible nodes from the voting configuration exclusion list.

External documentation

Query parameters

  • master_timeout string

    Period to wait for a connection to the master node.

  • wait_for_removal boolean

    Specifies whether to wait for all excluded nodes to be removed from the cluster before clearing the voting configuration exclusions list. Defaults to true, meaning that all excluded nodes must be removed from the cluster before this API takes any action. If set to false then the voting configuration exclusions list is cleared even if some excluded nodes are still in the cluster.

Responses

DELETE /_cluster/voting_config_exclusions 
curl \
 --request DELETE 'http://api.example.com/_cluster/voting_config_exclusions' \
 --header "Authorization: $API_KEY"

Get the cluster health status Added in 1.3.0

GET /_cluster/health
Api key auth Basic auth Bearer auth

You can also use the API to get the health status of only specified data streams and indices. For data streams, the API retrieves the health status of the stream’s backing indices.

The cluster health status is: green, yellow or red. On the shard level, a red status indicates that the specific shard is not allocated in the cluster. Yellow means that the primary shard is allocated but replicas are not. Green means that all shards are allocated. The index level status is controlled by the worst shard status.

One of the main benefits of the API is the ability to wait until the cluster reaches a certain high watermark health level. The cluster status is controlled by the worst index status.

Query parameters

  • expand_wildcards string | array[string]

    Whether to expand wildcard expression to concrete indices that are open, closed or both.

  • level string

    Can be one of cluster, indices or shards. Controls the details level of the health information returned.

    Values are cluster, indices, or shards.

  • local boolean

    If true, the request retrieves information from the local node only. Defaults to false, which means information is retrieved from the master node.

  • master_timeout string

    Period to wait for a connection to the master node. If no response is received before the timeout expires, the request fails and returns an error.

  • timeout string

    Period to wait for a response. If no response is received before the timeout expires, the request fails and returns an error.

  • wait_for_active_shards number | string

    A number controlling to how many active shards to wait for, all to wait for all shards in the cluster to be active, or 0 to not wait.

  • wait_for_events string

    Can be one of immediate, urgent, high, normal, low, languid. Wait until all currently queued events with the given priority are processed.

    Values are immediate, urgent, high, normal, low, or languid.

  • wait_for_nodes string | number

    The request waits until the specified number N of nodes is available. It also accepts >=N, <=N, >N and <N. Alternatively, it is possible to use ge(N), le(N), gt(N) and lt(N) notation.

  • wait_for_no_initializing_shards boolean

    A boolean value which controls whether to wait (until the timeout provided) for the cluster to have no shard initializations. Defaults to false, which means it will not wait for initializing shards.

  • wait_for_no_relocating_shards boolean

    A boolean value which controls whether to wait (until the timeout provided) for the cluster to have no shard relocations. Defaults to false, which means it will not wait for relocating shards.

  • wait_for_status string

    One of green, yellow or red. Will wait (until the timeout provided) until the status of the cluster changes to the one provided or better, i.e. green > yellow > red. By default, will not wait for any status.

    Values are green, GREEN, yellow, YELLOW, red, or RED.

Responses

GET /_cluster/health 
curl \
 --request GET 'http://api.example.com/_cluster/health' \
 --header "Authorization: $API_KEY"
Response examples (200)
A successful response from `GET _cluster/health`. It is the health status of a quiet single node cluster with a single index with one shard and one replica. 
{
  "cluster_name" : "testcluster",
  "status" : "yellow",
  "timed_out" : false,
  "number_of_nodes" : 1,
  "number_of_data_nodes" : 1,
  "active_primary_shards" : 1,
  "active_shards" : 1,
  "relocating_shards" : 0,
  "initializing_shards" : 0,
  "unassigned_shards" : 1,
  "delayed_unassigned_shards": 0,
  "number_of_pending_tasks" : 0,
  "number_of_in_flight_fetch": 0,
  "task_max_waiting_in_queue_millis": 0,
  "active_shards_percent_as_number": 50.0
}

Update the connector service type Beta

PUT /_connector/{connector_id}/_service_type
Api key auth Basic auth Bearer auth

Path parameters

  • connector_id string Required

    The unique identifier of the connector to be updated

application/json

Body Required

Responses

  • 200 application/json
    Hide response attribute Show response attribute object
    • result string Required

      Values are created, updated, deleted, not_found, or noop.
PUT /_connector/{connector_id}/_service_type 
curl \
 --request PUT 'http://api.example.com/_connector/{connector_id}/_service_type' \
 --header "Authorization: $API_KEY" \
 --header "Content-Type: application/json" \
 --data '"{\n    \"service_type\": \"sharepoint_online\"\n}"'
Request example 
{
    "service_type": "sharepoint_online"
}
Response examples (200) 
{
  "result": "updated"
}

Create a follower Added in 6.5.0

PUT /{index}/_ccr/follow
Api key auth Basic auth Bearer auth

Create a cross-cluster replication follower index that follows a specific leader index. When the API returns, the follower index exists and cross-cluster replication starts replicating operations from the leader index to the follower index.

Path parameters

  • index string Required

    The name of the follower index.

Query parameters

  • master_timeout string

    Period to wait for a connection to the master node.

  • wait_for_active_shards number | string

    Specifies the number of shards to wait on being active before responding. This defaults to waiting on none of the shards to be active. A shard must be restored from the leader index before being active. Restoring a follower shard requires transferring all the remote Lucene segment files to the follower index.

application/json

Body Required

  • data_stream_name string

    If the leader index is part of a data stream, the name to which the local data stream for the followed index should be renamed.

  • leader_index string Required
  • max_outstanding_read_requests number

    The maximum number of outstanding reads requests from the remote cluster.

  • max_outstanding_write_requests number

    The maximum number of outstanding write requests on the follower.

  • max_read_request_operation_count number

    The maximum number of operations to pull per read from the remote cluster.

  • max_read_request_size number | string

    One of:
    ByteSize number ByteSize string
  • max_retry_delay string

    A duration. Units can be nanos, micros, ms (milliseconds), s (seconds), m (minutes), h (hours) and d (days). Also accepts "0" without a unit and "-1" to indicate an unspecified value.

  • max_write_buffer_count number

    The maximum number of operations that can be queued for writing. When this limit is reached, reads from the remote cluster will be deferred until the number of queued operations goes below the limit.

  • max_write_buffer_size number | string

    One of:
    ByteSize number ByteSize string
  • max_write_request_operation_count number

    The maximum number of operations per bulk write request executed on the follower.

  • max_write_request_size number | string

    One of:
    ByteSize number ByteSize string
  • read_poll_timeout string

    A duration. Units can be nanos, micros, ms (milliseconds), s (seconds), m (minutes), h (hours) and d (days). Also accepts "0" without a unit and "-1" to indicate an unspecified value.

  • remote_cluster string Required

    The remote cluster containing the leader index.

  • settings object
    Hide settings attributes Show settings attributes object
    • index object
    • mode string

    • routing_path string | array[string]

      One of:
      string-1 string array-2 array[string]
    • soft_deletes object
      Hide soft_deletes attributes Show soft_deletes attributes object
      • enabled boolean

        Indicates whether soft deletes are enabled on the index.

      • retention_lease object
        Hide retention_lease attribute Show retention_lease attribute object
        • period string Required

          A duration. Units can be nanos, micros, ms (milliseconds), s (seconds), m (minutes), h (hours) and d (days). Also accepts "0" without a unit and "-1" to indicate an unspecified value.

    • sort object
      Hide sort attributes Show sort attributes object

    • number_of_shards number | string

      One of:
      number-1 number string-2 string

    • number_of_replicas number | string

      One of:
      number-1 number string-2 string
    • number_of_routing_shards number
    • check_on_startup string

      Values are true, false, or checksum.

    • codec string

    • routing_partition_size number | string

      Some APIs will return values such as numbers also as a string (notably epoch timestamps). This behavior is used to capture this behavior while keeping the semantics of the field type.

      Depending on the target language, code generators can keep the union or remove it and leniently parse strings to the target type.

      One of:
      Stringifiedinteger number Stringifiedinteger string
    • load_fixed_bitset_filters_eagerly boolean

    • hidden boolean | string

      One of:
      boolean-1 boolean string-2 string

    • auto_expand_replicas string | null

      One of:
      string-1 string NullValue string | null
    • merge object
      Hide merge attribute Show merge attribute object
      • scheduler object
        Hide scheduler attributes Show scheduler attributes object

        • max_thread_count number | string

          Some APIs will return values such as numbers also as a string (notably epoch timestamps). This behavior is used to capture this behavior while keeping the semantics of the field type.

          Depending on the target language, code generators can keep the union or remove it and leniently parse strings to the target type.

          One of:
          Stringifiedinteger number Stringifiedinteger string

        • max_merge_count number | string

          Some APIs will return values such as numbers also as a string (notably epoch timestamps). This behavior is used to capture this behavior while keeping the semantics of the field type.

          Depending on the target language, code generators can keep the union or remove it and leniently parse strings to the target type.

          One of:
          Stringifiedinteger number Stringifiedinteger string
    • search object
      Hide search attributes Show search attributes object
      • idle object
        Hide idle attribute Show idle attribute object
        • after string

          A duration. Units can be nanos, micros, ms (milliseconds), s (seconds), m (minutes), h (hours) and d (days). Also accepts "0" without a unit and "-1" to indicate an unspecified value.

      • slowlog object
        Hide slowlog attributes Show slowlog attributes object
        • level string
        • source number
        • reformat boolean
        • threshold object
          Hide threshold attributes Show threshold attributes object
          • query object
            Hide query attributes Show query attributes object
            • warn string

              A duration. Units can be nanos, micros, ms (milliseconds), s (seconds), m (minutes), h (hours) and d (days). Also accepts "0" without a unit and "-1" to indicate an unspecified value.

            • info string

              A duration. Units can be nanos, micros, ms (milliseconds), s (seconds), m (minutes), h (hours) and d (days). Also accepts "0" without a unit and "-1" to indicate an unspecified value.

            • debug string

              A duration. Units can be nanos, micros, ms (milliseconds), s (seconds), m (minutes), h (hours) and d (days). Also accepts "0" without a unit and "-1" to indicate an unspecified value.

            • trace string

              A duration. Units can be nanos, micros, ms (milliseconds), s (seconds), m (minutes), h (hours) and d (days). Also accepts "0" without a unit and "-1" to indicate an unspecified value.

          • fetch object
            Hide fetch attributes Show fetch attributes object
            • warn string

              A duration. Units can be nanos, micros, ms (milliseconds), s (seconds), m (minutes), h (hours) and d (days). Also accepts "0" without a unit and "-1" to indicate an unspecified value.

            • info string

              A duration. Units can be nanos, micros, ms (milliseconds), s (seconds), m (minutes), h (hours) and d (days). Also accepts "0" without a unit and "-1" to indicate an unspecified value.

            • debug string

              A duration. Units can be nanos, micros, ms (milliseconds), s (seconds), m (minutes), h (hours) and d (days). Also accepts "0" without a unit and "-1" to indicate an unspecified value.

            • trace string

              A duration. Units can be nanos, micros, ms (milliseconds), s (seconds), m (minutes), h (hours) and d (days). Also accepts "0" without a unit and "-1" to indicate an unspecified value.

    • refresh_interval string

      A duration. Units can be nanos, micros, ms (milliseconds), s (seconds), m (minutes), h (hours) and d (days). Also accepts "0" without a unit and "-1" to indicate an unspecified value.

    • max_result_window number
    • max_inner_result_window number
    • max_rescore_window number
    • max_docvalue_fields_search number
    • max_script_fields number
    • max_ngram_diff number
    • max_shingle_diff number
    • blocks object
      Hide blocks attributes Show blocks attributes object

      • read_only boolean | string

        Some APIs will return values such as numbers also as a string (notably epoch timestamps). This behavior is used to capture this behavior while keeping the semantics of the field type.

        Depending on the target language, code generators can keep the union or remove it and leniently parse strings to the target type.

        One of:
        Stringifiedboolean boolean Stringifiedboolean string

      • read_only_allow_delete boolean | string

        Some APIs will return values such as numbers also as a string (notably epoch timestamps). This behavior is used to capture this behavior while keeping the semantics of the field type.

        Depending on the target language, code generators can keep the union or remove it and leniently parse strings to the target type.

        One of:
        Stringifiedboolean boolean Stringifiedboolean string

      • read boolean | string

        Some APIs will return values such as numbers also as a string (notably epoch timestamps). This behavior is used to capture this behavior while keeping the semantics of the field type.

        Depending on the target language, code generators can keep the union or remove it and leniently parse strings to the target type.

        One of:
        Stringifiedboolean boolean Stringifiedboolean string

      • write boolean | string

        Some APIs will return values such as numbers also as a string (notably epoch timestamps). This behavior is used to capture this behavior while keeping the semantics of the field type.

        Depending on the target language, code generators can keep the union or remove it and leniently parse strings to the target type.

        One of:
        Stringifiedboolean boolean Stringifiedboolean string

      • metadata boolean | string

        Some APIs will return values such as numbers also as a string (notably epoch timestamps). This behavior is used to capture this behavior while keeping the semantics of the field type.

        Depending on the target language, code generators can keep the union or remove it and leniently parse strings to the target type.

        One of:
        Stringifiedboolean boolean Stringifiedboolean string
    • max_refresh_listeners number
    • analyze object
      Hide analyze attribute Show analyze attribute object

      • max_token_count number | string

        Some APIs will return values such as numbers also as a string (notably epoch timestamps). This behavior is used to capture this behavior while keeping the semantics of the field type.

        Depending on the target language, code generators can keep the union or remove it and leniently parse strings to the target type.

        One of:
        Stringifiedinteger number Stringifiedinteger string
    • highlight object
      Hide highlight attribute Show highlight attribute object
    • max_terms_count number
    • max_regex_length number
    • routing object
      Hide routing attributes Show routing attributes object
    • gc_deletes string

      A duration. Units can be nanos, micros, ms (milliseconds), s (seconds), m (minutes), h (hours) and d (days). Also accepts "0" without a unit and "-1" to indicate an unspecified value.

    • default_pipeline string
    • final_pipeline string
    • lifecycle object
      Hide lifecycle attributes Show lifecycle attributes object
      • name string

      • indexing_complete boolean | string

        Some APIs will return values such as numbers also as a string (notably epoch timestamps). This behavior is used to capture this behavior while keeping the semantics of the field type.

        Depending on the target language, code generators can keep the union or remove it and leniently parse strings to the target type.

        One of:
        Stringifiedboolean boolean Stringifiedboolean string
      • origination_date number

        If specified, this is the timestamp used to calculate the index age for its phase transitions. Use this setting if you create a new index that contains old data and want to use the original creation date to calculate the index age. Specified as a Unix epoch value in milliseconds.

      • parse_origination_date boolean

        Set to true to parse the origination date from the index name. This origination date is used to calculate the index age for its phase transitions. The index name must match the pattern .*-{date_format}-\d+, where the date_format is yyyy.MM.dd and the trailing digits are optional. An index that was rolled over would normally match the full format, for example logs-2016.10.31-000002). If the index name doesn’t match the pattern, index creation fails.

      • step object
        Hide step attribute Show step attribute object
        • wait_time_threshold string

          A duration. Units can be nanos, micros, ms (milliseconds), s (seconds), m (minutes), h (hours) and d (days). Also accepts "0" without a unit and "-1" to indicate an unspecified value.

      • rollover_alias string

        The index alias to update when the index rolls over. Specify when using a policy that contains a rollover action. When the index rolls over, the alias is updated to reflect that the index is no longer the write index. For more information about rolling indices, see Rollover.

      • prefer_ilm boolean | string

        Preference for the system that manages a data stream backing index (preferring ILM when both ILM and DLM are applicable for an index).

        One of:
        boolean-1 boolean string-2 string
    • provided_name string

    • creation_date number | string

      Some APIs will return values such as numbers also as a string (notably epoch timestamps). This behavior is used to capture this behavior while keeping the semantics of the field type.

      Depending on the target language, code generators can keep the union or remove it and leniently parse strings to the target type.

      One of:
      UnitMillis number StringifiedEpochTimeUnitMillis string

      Time unit for milliseconds

    • creation_date_string string | number

      A date and time, either as a string whose format can depend on the context (defaulting to ISO 8601), or a number of milliseconds since the Epoch. Elasticsearch accepts both as input, but will generally output a string representation.

      One of:
      DateTime string UnitMillis number
    • uuid string
    • version object
      Hide version attributes Show version attributes object

    • verified_before_close boolean | string

      One of:
      boolean-1 boolean string-2 string

    • format string | number

      One of:
      string-1 string number-2 number
    • max_slices_per_scroll number
    • translog object
      Hide translog attributes Show translog attributes object
    • query_string object
      Hide query_string attribute Show query_string attribute object

      • lenient boolean | string Required

        Some APIs will return values such as numbers also as a string (notably epoch timestamps). This behavior is used to capture this behavior while keeping the semantics of the field type.

        Depending on the target language, code generators can keep the union or remove it and leniently parse strings to the target type.

        One of:
        Stringifiedboolean boolean Stringifiedboolean string

    • priority number | string

      One of:
      number-1 number string-2 string
    • top_metrics_max_size number
    • analysis object
      Hide analysis attributes Show analysis attributes object
    • settings object
    • time_series object
      Hide time_series attributes Show time_series attributes object

      • end_time string | number

        A date and time, either as a string whose format can depend on the context (defaulting to ISO 8601), or a number of milliseconds since the Epoch. Elasticsearch accepts both as input, but will generally output a string representation.

        One of:
        DateTime string UnitMillis number

      • start_time string | number

        A date and time, either as a string whose format can depend on the context (defaulting to ISO 8601), or a number of milliseconds since the Epoch. Elasticsearch accepts both as input, but will generally output a string representation.

        One of:
        DateTime string UnitMillis number
    • queries object
      Hide queries attribute Show queries attribute object
      • cache object
        Hide cache attribute Show cache attribute object
    • similarity object

      Configure custom similarity settings to customize how search results are scored.

    • mapping object
      Hide mapping attributes Show mapping attributes object
      • coerce boolean
      • total_fields object
        Hide total_fields attributes Show total_fields attributes object

        • limit number | string

          The maximum number of fields in an index. Field and object mappings, as well as field aliases count towards this limit. The limit is in place to prevent mappings and searches from becoming too large. Higher values can lead to performance degradations and memory issues, especially in clusters with a high load or few resources.

          One of:
          number-1 number string-2 string

        • ignore_dynamic_beyond_limit boolean | string

          This setting determines what happens when a dynamically mapped field would exceed the total fields limit. When set to false (the default), the index request of the document that tries to add a dynamic field to the mapping will fail with the message Limit of total fields [X] has been exceeded. When set to true, the index request will not fail. Instead, fields that would exceed the limit are not added to the mapping, similar to dynamic: false. The fields that were not added to the mapping will be added to the _ignored field.

          One of:
          boolean-1 boolean string-2 string
      • depth object
        Hide depth attribute Show depth attribute object
        • limit number

          The maximum depth for a field, which is measured as the number of inner objects. For instance, if all fields are defined at the root object level, then the depth is 1. If there is one object mapping, then the depth is 2, etc.

      • nested_fields object
        Hide nested_fields attribute Show nested_fields attribute object
        • limit number

          The maximum number of distinct nested mappings in an index. The nested type should only be used in special cases, when arrays of objects need to be queried independently of each other. To safeguard against poorly designed mappings, this setting limits the number of unique nested types per index.

      • nested_objects object
        Hide nested_objects attribute Show nested_objects attribute object
        • limit number

          The maximum number of nested JSON objects that a single document can contain across all nested types. This limit helps to prevent out of memory errors when a document contains too many nested objects.

      • field_name_length object
        Hide field_name_length attribute Show field_name_length attribute object
        • limit number

          Setting for the maximum length of a field name. This setting isn’t really something that addresses mappings explosion but might still be useful if you want to limit the field length. It usually shouldn’t be necessary to set this setting. The default is okay unless a user starts to add a huge number of fields with really long names. Default is Long.MAX_VALUE (no limit).

      • dimension_fields object
        Hide dimension_fields attribute Show dimension_fields attribute object
        • limit number

          [preview] This functionality is in technical preview and may be changed or removed in a future release. Elastic will work to fix any issues, but features in technical preview are not subject to the support SLA of official GA features.

      • source object
        Hide source attribute Show source attribute object
        • mode string Required

          Values are disabled, stored, or synthetic.

      • ignore_malformed boolean | string

        One of:
        boolean-1 boolean string-2 string
    • indexing.slowlog object
      Hide indexing.slowlog attributes Show indexing.slowlog attributes object
      • level string
      • source number
      • reformat boolean
      • threshold object
        Hide threshold attribute Show threshold attribute object
        • index object
          Hide index attributes Show index attributes object
          • warn string

            A duration. Units can be nanos, micros, ms (milliseconds), s (seconds), m (minutes), h (hours) and d (days). Also accepts "0" without a unit and "-1" to indicate an unspecified value.

          • info string

            A duration. Units can be nanos, micros, ms (milliseconds), s (seconds), m (minutes), h (hours) and d (days). Also accepts "0" without a unit and "-1" to indicate an unspecified value.

          • debug string

            A duration. Units can be nanos, micros, ms (milliseconds), s (seconds), m (minutes), h (hours) and d (days). Also accepts "0" without a unit and "-1" to indicate an unspecified value.

          • trace string

            A duration. Units can be nanos, micros, ms (milliseconds), s (seconds), m (minutes), h (hours) and d (days). Also accepts "0" without a unit and "-1" to indicate an unspecified value.

    • indexing_pressure object
      Hide indexing_pressure attribute Show indexing_pressure attribute object
      • memory object Required
        Hide memory attribute Show memory attribute object
        • limit number

          Number of outstanding bytes that may be consumed by indexing requests. When this limit is reached or exceeded, the node will reject new coordinating and primary operations. When replica operations consume 1.5x this limit, the node will reject new replica operations. Defaults to 10% of the heap.

    • store object
      Hide store attributes Show store attributes object

      • type string Required

        Any of:
        StorageType string StorageType string

        Values are fs, niofs, mmapfs, or hybridfs.

      • allow_mmap boolean

        You can restrict the use of the mmapfs and the related hybridfs store type via the setting node.store.allow_mmap. This is a boolean setting indicating whether or not memory-mapping is allowed. The default is to allow it. This setting is useful, for example, if you are in an environment where you can not control the ability to create a lot of memory maps so you need disable the ability to use memory-mapping.

Responses

PUT /{index}/_ccr/follow 
curl \
 --request PUT 'http://api.example.com/{index}/_ccr/follow' \
 --header "Authorization: $API_KEY" \
 --header "Content-Type: application/json" \
 --data '"{\n  \"remote_cluster\" : \"remote_cluster\",\n  \"leader_index\" : \"leader_index\",\n  \"settings\": {\n    \"index.number_of_replicas\": 0\n  },\n  \"max_read_request_operation_count\" : 1024,\n  \"max_outstanding_read_requests\" : 16,\n  \"max_read_request_size\" : \"1024k\",\n  \"max_write_request_operation_count\" : 32768,\n  \"max_write_request_size\" : \"16k\",\n  \"max_outstanding_write_requests\" : 8,\n  \"max_write_buffer_count\" : 512,\n  \"max_write_buffer_size\" : \"512k\",\n  \"max_retry_delay\" : \"10s\",\n  \"read_poll_timeout\" : \"30s\"\n}"'
Request example
Run `PUT /follower_index/_ccr/follow?wait_for_active_shards=1` to create a follower index named `follower_index`. 
{
  "remote_cluster" : "remote_cluster",
  "leader_index" : "leader_index",
  "settings": {
    "index.number_of_replicas": 0
  },
  "max_read_request_operation_count" : 1024,
  "max_outstanding_read_requests" : 16,
  "max_read_request_size" : "1024k",
  "max_write_request_operation_count" : 32768,
  "max_write_request_size" : "16k",
  "max_outstanding_write_requests" : 8,
  "max_write_buffer_count" : 512,
  "max_write_buffer_size" : "512k",
  "max_retry_delay" : "10s",
  "read_poll_timeout" : "30s"
}
Response examples (200)
A successful response from `PUT /follower_index/_ccr/follow?wait_for_active_shards=1`. 
{
  "follow_index_created" : true,
  "follow_index_shards_acked" : true,
  "index_following_started" : true
}

Resume an auto-follow pattern Added in 7.5.0

POST /_ccr/auto_follow/{name}/resume
Api key auth Basic auth Bearer auth

Resume a cross-cluster replication auto-follow pattern that was paused. The auto-follow pattern will resume configuring following indices for newly created indices that match its patterns on the remote cluster. Remote indices created while the pattern was paused will also be followed unless they have been deleted or closed in the interim.

External documentation

Path parameters

  • name string Required

    The name of the auto-follow pattern to resume.

Query parameters

  • master_timeout string

    The period to wait for a connection to the master node. If the master node is not available before the timeout expires, the request fails and returns an error. It can also be set to -1 to indicate that the request should never timeout.

Responses

  • 200 application/json
    Hide response attribute Show response attribute object
    • acknowledged boolean Required

      For a successful response, this value is always true. On failure, an exception is returned instead.
POST /_ccr/auto_follow/{name}/resume 
curl \
 --request POST 'http://api.example.com/_ccr/auto_follow/{name}/resume' \
 --header "Authorization: $API_KEY"
Response examples (200)
A successful response `POST /_ccr/auto_follow/my_auto_follow_pattern/resume`, which resumes an auto-follow pattern. 
{
  "acknowledged" : true
}

Unfollow an index Added in 6.5.0

POST /{index}/_ccr/unfollow
Api key auth Basic auth Bearer auth

Convert a cross-cluster replication follower index to a regular index. The API stops the following task associated with a follower index and removes index metadata and settings associated with cross-cluster replication. The follower index must be paused and closed before you call the unfollow API.


Currently cross-cluster replication does not support converting an existing regular index to a follower index. Converting a follower index to a regular index is an irreversible operation.

External documentation

Path parameters

  • index string Required

    The name of the follower index.

Query parameters

  • master_timeout string

    The period to wait for a connection to the master node. If the master node is not available before the timeout expires, the request fails and returns an error. It can also be set to -1 to indicate that the request should never timeout.

Responses

  • 200 application/json
    Hide response attribute Show response attribute object
    • acknowledged boolean Required

      For a successful response, this value is always true. On failure, an exception is returned instead.
POST /{index}/_ccr/unfollow 
curl \
 --request POST 'http://api.example.com/{index}/_ccr/unfollow' \
 --header "Authorization: $API_KEY"
Response examples (200)
A successful response from `POST /follower_index/_ccr/unfollow`. 
{
  "acknowledged" : true
}

Get data stream lifecycles Added in 8.11.0

GET /_data_stream/{name}/_lifecycle
Api key auth Basic auth Bearer auth

Get the data stream lifecycle configuration of one or more data streams.

Path parameters

  • name string | array[string] Required

    Comma-separated list of data streams to limit the request. Supports wildcards (*). To target all data streams, omit this parameter or use * or _all.

Query parameters

  • expand_wildcards string | array[string]

    Type of data stream that wildcard patterns can match. Supports comma-separated values, such as open,hidden. Valid values are: all, open, closed, hidden, none.

  • include_defaults boolean

    If true, return all default settings in the response.

  • master_timeout string

    Period to wait for a connection to the master node. If no response is received before the timeout expires, the request fails and returns an error.

Responses

  • 200 application/json
    Hide response attribute Show response attribute object
    • data_streams array[object] Required
      Hide data_streams attributes Show data_streams attributes object
      • name string Required
      • lifecycle object
        Hide lifecycle attributes Show lifecycle attributes object
GET /_data_stream/{name}/_lifecycle 
curl \
 --request GET 'http://api.example.com/_data_stream/{name}/_lifecycle' \
 --header "Authorization: $API_KEY"
Response examples (200)
A successful response from `GET _lifecycle/stats?human&pretty`. 
{
  "data_streams": [
    {
      "name": "my-data-stream-1",
      "lifecycle": {
        "enabled": true,
        "data_retention": "7d"
      }
    },
    {
      "name": "my-data-stream-2",
      "lifecycle": {
        "enabled": true,
        "data_retention": "7d"
      }
    }
  ]
}

Create or update a document in an index

POST /{index}/_doc
Api key auth Basic auth Bearer auth

Add a JSON document to the specified data stream or index and make it searchable. If the target is an index and the document already exists, the request updates the document and increments its version.

NOTE: You cannot use this API to send update requests for existing documents in a data stream.

If the Elasticsearch security features are enabled, you must have the following index privileges for the target data stream, index, or index alias:

  • To add or overwrite a document using the PUT /<target>/_doc/<_id> request format, you must have the create, index, or write index privilege.
  • To add a document using the POST /<target>/_doc/ request format, you must have the create_doc, create, index, or write index privilege.
  • To automatically create a data stream or index with this API request, you must have the auto_configure, create_index, or manage index privilege.

Automatic data stream creation requires a matching index template with data stream enabled.

NOTE: Replica shards might not all be started when an indexing operation returns successfully. By default, only the primary is required. Set wait_for_active_shards to change this default behavior.

Automatically create data streams and indices

If the request's target doesn't exist and matches an index template with a data_stream definition, the index operation automatically creates the data stream.

If the target doesn't exist and doesn't match a data stream template, the operation automatically creates the index and applies any matching index templates.

NOTE: Elasticsearch includes several built-in index templates. To avoid naming collisions with these templates, refer to index pattern documentation.

If no mapping exists, the index operation creates a dynamic mapping. By default, new fields and objects are automatically added to the mapping if needed.

Automatic index creation is controlled by the action.auto_create_index setting. If it is true, any index can be created automatically. You can modify this setting to explicitly allow or block automatic creation of indices that match specified patterns or set it to false to turn off automatic index creation entirely. Specify a comma-separated list of patterns you want to allow or prefix each pattern with + or - to indicate whether it should be allowed or blocked. When a list is specified, the default behaviour is to disallow.

NOTE: The action.auto_create_index setting affects the automatic creation of indices only. It does not affect the creation of data streams.

Optimistic concurrency control

Index operations can be made conditional and only be performed if the last modification to the document was assigned the sequence number and primary term specified by the if_seq_no and if_primary_term parameters. If a mismatch is detected, the operation will result in a VersionConflictException and a status code of 409.

Routing

By default, shard placement — or routing — is controlled by using a hash of the document's ID value. For more explicit control, the value fed into the hash function used by the router can be directly specified on a per-operation basis using the routing parameter.

When setting up explicit mapping, you can also use the _routing field to direct the index operation to extract the routing value from the document itself. This does come at the (very minimal) cost of an additional document parsing pass. If the _routing mapping is defined and set to be required, the index operation will fail if no routing value is provided or extracted.

NOTE: Data streams do not support custom routing unless they were created with the allow_custom_routing setting enabled in the template.

Distributed

The index operation is directed to the primary shard based on its route and performed on the actual node containing this shard. After the primary shard completes the operation, if needed, the update is distributed to applicable replicas.

Active shards

To improve the resiliency of writes to the system, indexing operations can be configured to wait for a certain number of active shard copies before proceeding with the operation. If the requisite number of active shard copies are not available, then the write operation must wait and retry, until either the requisite shard copies have started or a timeout occurs. By default, write operations only wait for the primary shards to be active before proceeding (that is to say wait_for_active_shards is 1). This default can be overridden in the index settings dynamically by setting index.write.wait_for_active_shards. To alter this behavior per operation, use the wait_for_active_shards request parameter.

Valid values are all or any positive integer up to the total number of configured copies per shard in the index (which is number_of_replicas+1). Specifying a negative value or a number greater than the number of shard copies will throw an error.

For example, suppose you have a cluster of three nodes, A, B, and C and you create an index index with the number of replicas set to 3 (resulting in 4 shard copies, one more copy than there are nodes). If you attempt an indexing operation, by default the operation will only ensure the primary copy of each shard is available before proceeding. This means that even if B and C went down and A hosted the primary shard copies, the indexing operation would still proceed with only one copy of the data. If wait_for_active_shards is set on the request to 3 (and all three nodes are up), the indexing operation will require 3 active shard copies before proceeding. This requirement should be met because there are 3 active nodes in the cluster, each one holding a copy of the shard. However, if you set wait_for_active_shards to all (or to 4, which is the same in this situation), the indexing operation will not proceed as you do not have all 4 copies of each shard active in the index. The operation will timeout unless a new node is brought up in the cluster to host the fourth copy of the shard.

It is important to note that this setting greatly reduces the chances of the write operation not writing to the requisite number of shard copies, but it does not completely eliminate the possibility, because this check occurs before the write operation starts. After the write operation is underway, it is still possible for replication to fail on any number of shard copies but still succeed on the primary. The _shards section of the API response reveals the number of shard copies on which replication succeeded and failed.

No operation (noop) updates

When updating a document by using this API, a new version of the document is always created even if the document hasn't changed. If this isn't acceptable use the _update API with detect_noop set to true. The detect_noop option isn't available on this API because it doesn’t fetch the old source and isn't able to compare it against the new source.

There isn't a definitive rule for when noop updates aren't acceptable. It's a combination of lots of factors like how frequently your data source sends updates that are actually noops and how many queries per second Elasticsearch runs on the shard receiving the updates.

Versioning

Each indexed document is given a version number. By default, internal versioning is used that starts at 1 and increments with each update, deletes included. Optionally, the version number can be set to an external value (for example, if maintained in a database). To enable this functionality, version_type should be set to external. The value provided must be a numeric, long value greater than or equal to 0, and less than around 9.2e+18.

NOTE: Versioning is completely real time, and is not affected by the near real time aspects of search operations. If no version is provided, the operation runs without any version checks.

When using the external version type, the system checks to see if the version number passed to the index request is greater than the version of the currently stored document. If true, the document will be indexed and the new version number used. If the value provided is less than or equal to the stored document's version number, a version conflict will occur and the index operation will fail. For example:

PUT my-index-000001/_doc/1?version=2&version_type=external
{
  "user": {
    "id": "elkbee"
  }
}

In this example, the operation will succeed since the supplied version of 2 is higher than the current document version of 1.
If the document was already updated and its version was set to 2 or higher, the indexing command will fail and result in a conflict (409 HTTP status code).

A nice side effect is that there is no need to maintain strict ordering of async indexing operations run as a result of changes to a source database, as long as version numbers from the source database are used.
Even the simple case of updating the Elasticsearch index using data from a database is simplified if external versioning is used, as only the latest version will be used if the index operations arrive out of order.
External documentation

Path parameters

  • index string Required

    The name of the data stream or index to target. If the target doesn't exist and matches the name or wildcard (*) pattern of an index template with a data_stream definition, this request creates the data stream. If the target doesn't exist and doesn't match a data stream template, this request creates the index. You can check for existing targets with the resolve index API.

Query parameters

  • if_primary_term number

    Only perform the operation if the document has this primary term.

  • if_seq_no number

    Only perform the operation if the document has this sequence number.

  • include_source_on_error boolean

    True or false if to include the document source in the error message in case of parsing errors.

  • op_type string

    Set to create to only index the document if it does not already exist (put if absent). If a document with the specified _id already exists, the indexing operation will fail. The behavior is the same as using the <index>/_create endpoint. If a document ID is specified, this paramater defaults to index. Otherwise, it defaults to create. If the request targets a data stream, an op_type of create is required.

    Values are index or create.

  • pipeline string

    The ID of the pipeline to use to preprocess incoming documents. If the index has a default ingest pipeline specified, then setting the value to _none disables the default ingest pipeline for this request. If a final pipeline is configured it will always run, regardless of the value of this parameter.

  • refresh string

    If true, Elasticsearch refreshes the affected shards to make this operation visible to search. If wait_for, it waits for a refresh to make this operation visible to search. If false, it does nothing with refreshes.

    Values are true, false, or wait_for.

  • routing string

    A custom value that is used to route operations to a specific shard.

  • timeout string

    The period the request waits for the following operations: automatic index creation, dynamic mapping updates, waiting for active shards.

    This parameter is useful for situations where the primary shard assigned to perform the operation might not be available when the operation runs. Some reasons for this might be that the primary shard is currently recovering from a gateway or undergoing relocation. By default, the operation will wait on the primary shard to become available for at least 1 minute before failing and responding with an error. The actual wait time could be longer, particularly when multiple waits occur.

  • version number

    An explicit version number for concurrency control. It must be a non-negative long number.

  • version_type string

    The version type.

    Values are internal, external, external_gte, or force.

  • wait_for_active_shards number | string

    The number of shard copies that must be active before proceeding with the operation. You can set it to all or any positive integer up to the total number of shards in the index (number_of_replicas+1). The default value of 1 means it waits for each primary shard to be active.

  • require_alias boolean

    If true, the destination must be an index alias.

application/json

Body Required

object object

Responses

POST /{index}/_doc 
curl \
 --request POST 'http://api.example.com/{index}/_doc' \
 --header "Authorization: $API_KEY" \
 --header "Content-Type: application/json" \
 --data '"{\n  \"@timestamp\": \"2099-11-15T13:12:00\",\n  \"message\": \"GET /search HTTP/1.1 200 1070000\",\n  \"user\": {\n    \"id\": \"kimchy\"\n  }\n}"'
Request examples
Run `POST my-index-000001/_doc/` to index a document. When you use the `POST /<target>/_doc/` request format, the `op_type` is automatically set to `create` and the index operation generates a unique ID for the document. 
{
  "@timestamp": "2099-11-15T13:12:00",
  "message": "GET /search HTTP/1.1 200 1070000",
  "user": {
    "id": "kimchy"
  }
}
Run `PUT my-index-000001/_doc/1` to insert a JSON document into the `my-index-000001` index with an `_id` of 1. 
{
  "@timestamp": "2099-11-15T13:12:00",
  "message": "GET /search HTTP/1.1 200 1070000",
  "user": {
    "id": "kimchy"
  }
}
Response examples (200)
A successful response from `POST my-index-000001/_doc/`, which contains an automated document ID. 
{
  "_shards": {
    "total": 2,
    "failed": 0,
    "successful": 2
  },
  "_index": "my-index-000001",
  "_id": "W0tpsmIBdwcYyG50zbta",
  "_version": 1,
  "_seq_no": 0,
  "_primary_term": 1,
  "result": "created"
}
A successful response from `PUT my-index-000001/_doc/1`. 
{
  "_shards": {
    "total": 2,
    "failed": 0,
    "successful": 2
  },
  "_index": "my-index-000001",
  "_id": "1",
  "_version": 1,
  "_seq_no": 0,
  "_primary_term": 1,
  "result": "created"
}

Delete an enrich policy Added in 7.5.0

DELETE /_enrich/policy/{name}
Api key auth Basic auth Bearer auth

Deletes an existing enrich policy and its enrich index.

Path parameters

  • name string Required

    Enrich policy to delete.

Query parameters

Responses

  • 200 application/json
    Hide response attribute Show response attribute object
    • acknowledged boolean Required

      For a successful response, this value is always true. On failure, an exception is returned instead.
DELETE /_enrich/policy/{name} 
curl \
 --request DELETE 'http://api.example.com/_enrich/policy/{name}' \
 --header "Authorization: $API_KEY"
Response examples (200) 
{
  "acknowledged": true
}

Run multiple Fleet searches Technical preview

POST /{index}/_fleet/_fleet_msearch
Api key auth Basic auth Bearer auth

Run several Fleet searches with a single API request. The API follows the same structure as the multi search API. However, similar to the Fleet search API, it supports the wait_for_checkpoints parameter.

Path parameters

  • index string Required

    A single target to search. If the target is an index alias, it must resolve to a single index.

Query parameters

  • allow_no_indices boolean

    If false, the request returns an error if any wildcard expression, index alias, or _all value targets only missing or closed indices. This behavior applies even if the request targets other open indices. For example, a request targeting foo*,bar* returns an error if an index starts with foo but no index starts with bar.

  • ccs_minimize_roundtrips boolean

    If true, network roundtrips between the coordinating node and remote clusters are minimized for cross-cluster search requests.

  • expand_wildcards string | array[string]

    Type of index that wildcard expressions can match. If the request can target data streams, this argument determines whether wildcard expressions match hidden data streams.

  • ignore_throttled boolean

    If true, concrete, expanded or aliased indices are ignored when frozen.

  • ignore_unavailable boolean

    If true, missing or closed indices are not included in the response.

  • max_concurrent_searches number

    Maximum number of concurrent searches the multi search API can execute.

  • max_concurrent_shard_requests number

    Maximum number of concurrent shard requests that each sub-search request executes per node.

  • pre_filter_shard_size number

    Defines a threshold that enforces a pre-filter roundtrip to prefilter search shards based on query rewriting if the number of shards the search request expands to exceeds the threshold. This filter roundtrip can limit the number of shards significantly if for instance a shard can not match any documents based on its rewrite method i.e., if date filters are mandatory to match but the shard bounds and the query are disjoint.

  • search_type string

    Indicates whether global term and document frequencies should be used when scoring returned documents.

    Values are query_then_fetch or dfs_query_then_fetch.

  • rest_total_hits_as_int boolean

    If true, hits.total are returned as an integer in the response. Defaults to false, which returns an object.

  • typed_keys boolean

    Specifies whether aggregation and suggester names should be prefixed by their respective types in the response.

  • wait_for_checkpoints array[number]

    A comma separated list of checkpoints. When configured, the search API will only be executed on a shard after the relevant checkpoint has become visible for search. Defaults to an empty list which will cause Elasticsearch to immediately execute the search.

  • allow_partial_search_results boolean

    If true, returns partial results if there are shard request timeouts or shard failures. If false, returns an error with no partial results. Defaults to the configured cluster setting search.default_allow_partial_results, which is true by default.

application/json

Body object Required

One of:
MultisearchHeader object SearchRequestBody object

Responses

  • 200 application/json
    Hide response attribute Show response attribute object
POST /{index}/_fleet/_fleet_msearch 
curl \
 --request POST 'http://api.example.com/{index}/_fleet/_fleet_msearch' \
 --header "Authorization: $API_KEY" \
 --header "Content-Type: application/json" \
 --data '[{"allow_no_indices":true,"expand_wildcards":"string","ignore_unavailable":true,"index":"string","preference":"string","request_cache":true,"routing":"string","search_type":"query_then_fetch","ccs_minimize_roundtrips":true,"allow_partial_search_results":true,"ignore_throttled":true}]'
Request examples 
[
  {
    "allow_no_indices": true,
    "expand_wildcards": "string",
    "ignore_unavailable": true,
    "index": "string",
    "preference": "string",
    "request_cache": true,
    "routing": "string",
    "search_type": "query_then_fetch",
    "ccs_minimize_roundtrips": true,
    "allow_partial_search_results": true,
    "ignore_throttled": true
  }
]
Response examples (200) 
{
  "docs": [
    {
      "took": 42.0,
      "timed_out": true,
      "_shards": {
        "failed": 42.0,
        "successful": 42.0,
        "total": 42.0,
        "failures": [
          {}
        ],
        "skipped": 42.0
      },
      "hits": {
        "hits": [
          {}
        ]
      },
      "aggregations": {},
      "_clusters": {
        "skipped": 42.0,
        "successful": 42.0,
        "total": 42.0,
        "running": 42.0,
        "partial": 42.0,
        "failed": 42.0,
        "details": {}
      },
      "fields": {
        "additionalProperty1": {},
        "additionalProperty2": {}
      },
      "max_score": 42.0,
      "num_reduce_phases": 42.0,
      "profile": {
        "shards": [
          {}
        ]
      },
      "pit_id": "string",
      "_scroll_id": "string",
      "suggest": {
        "additionalProperty1": [
          {}
        ],
        "additionalProperty2": [
          {}
        ]
      },
      "terminated_early": true,
      "status": 42.0
    }
  ]
}

Get field usage stats Technical preview

GET /{index}/_field_usage_stats
Api key auth Basic auth Bearer auth

Get field usage information for each shard and field of an index. Field usage statistics are automatically captured when queries are running on a cluster. A shard-level search request that accesses a given field, even if multiple times during that request, is counted as a single use.

The response body reports the per-shard usage count of the data structures that back the fields in the index. A given request will increment each count by a maximum value of 1, even if the request accesses the same field multiple times.

Path parameters

  • index string | array[string] Required

    Comma-separated list or wildcard expression of index names used to limit the request.

Query parameters

  • allow_no_indices boolean

    If false, the request returns an error if any wildcard expression, index alias, or _all value targets only missing or closed indices. This behavior applies even if the request targets other open indices. For example, a request targeting foo*,bar* returns an error if an index starts with foo but no index starts with bar.

  • expand_wildcards string | array[string]

    Type of index that wildcard patterns can match. If the request can target data streams, this argument determines whether wildcard expressions match hidden data streams. Supports comma-separated values, such as open,hidden.

  • ignore_unavailable boolean

    If true, missing or closed indices are not included in the response.

  • fields string | array[string]

    Comma-separated list or wildcard expressions of fields to include in the statistics.

Responses

GET /{index}/_field_usage_stats 
curl \
 --request GET 'http://api.example.com/{index}/_field_usage_stats' \
 --header "Authorization: $API_KEY"
Response examples (200)
An abbreviated response from `GET /my-index-000001/_field_usage_stats`. The `all_fields` object reports the sums of the usage counts for all fields in the index (on the listed shard). 
{
  "_shards": {
    "total": 1,
    "successful": 1,
    "failed": 0
  },
  "my-index-000001": {
    "shards": [
      {
        "tracking_id": "MpOl0QlTQ4SYYhEe6KgJoQ",
        "tracking_started_at_millis": 1625558985010,
        "routing": {
          "state": "STARTED",
          "primary": true,
          "node": "gA6KeeVzQkGURFCUyV-e8Q",
          "relocating_node": null
        },
        "stats": {
          "all_fields": {
            "any": "6",
            "inverted_index": {
              "terms": 1,
              "postings": 1,
              "proximity": 1,
              "positions": 0,
              "term_frequencies": 1,
              "offsets": 0,
              "payloads": 0
            },
            "stored_fields": 2,
            "doc_values": 1,
            "points": 0,
            "norms": 1,
            "term_vectors": 0,
            "knn_vectors": 0
          },
          "fields": {
            "_id": {
              "any": 1,
              "inverted_index": {
                "terms": 1,
                "postings": 1,
                "proximity": 1,
                "positions": 0,
                "term_frequencies": 1,
                "offsets": 0,
                "payloads": 0
              },
              "stored_fields": 1,
              "doc_values": 0,
              "points": 0,
              "norms": 0,
              "term_vectors": 0,
              "knn_vectors": 0
            },
            "_source": {},
            "context": {},
            "message.keyword": {}
          }
        }
      }
    ]
  }
}

Force a merge Added in 2.1.0

POST /{index}/_forcemerge
Api key auth Basic auth Bearer auth

Perform the force merge operation on the shards of one or more indices. For data streams, the API forces a merge on the shards of the stream's backing indices.

Merging reduces the number of segments in each shard by merging some of them together and also frees up the space used by deleted documents. Merging normally happens automatically, but sometimes it is useful to trigger a merge manually.

WARNING: We recommend force merging only a read-only index (meaning the index is no longer receiving writes). When documents are updated or deleted, the old version is not immediately removed but instead soft-deleted and marked with a "tombstone". These soft-deleted documents are automatically cleaned up during regular segment merges. But force merge can cause very large (greater than 5 GB) segments to be produced, which are not eligible for regular merges. So the number of soft-deleted documents can then grow rapidly, resulting in higher disk usage and worse search performance. If you regularly force merge an index receiving writes, this can also make snapshots more expensive, since the new documents can't be backed up incrementally.

Blocks during a force merge

Calls to this API block until the merge is complete (unless request contains wait_for_completion=false). If the client connection is lost before completion then the force merge process will continue in the background. Any new requests to force merge the same indices will also block until the ongoing force merge is complete.

Running force merge asynchronously

If the request contains wait_for_completion=false, Elasticsearch performs some preflight checks, launches the request, and returns a task you can use to get the status of the task. However, you can not cancel this task as the force merge task is not cancelable. Elasticsearch creates a record of this task as a document at _tasks/<task_id>. When you are done with a task, you should delete the task document so Elasticsearch can reclaim the space.

Force merging multiple indices

You can force merge multiple indices with a single request by targeting:

  • One or more data streams that contain multiple backing indices
  • Multiple indices
  • One or more aliases
  • All data streams and indices in a cluster

Each targeted shard is force-merged separately using the force_merge threadpool. By default each node only has a single force_merge thread which means that the shards on that node are force-merged one at a time. If you expand the force_merge threadpool on a node then it will force merge its shards in parallel

Force merge makes the storage for the shard being merged temporarily increase, as it may require free space up to triple its size in case max_num_segments parameter is set to 1, to rewrite all segments into a new one.

Data streams and time-based indices

Force-merging is useful for managing a data stream's older backing indices and other time-based indices, particularly after a rollover. In these cases, each index only receives indexing traffic for a certain period of time. Once an index receive no more writes, its shards can be force-merged to a single segment. This can be a good idea because single-segment shards can sometimes use simpler and more efficient data structures to perform searches. For example:

POST /.ds-my-data-stream-2099.03.07-000001/_forcemerge?max_num_segments=1
External documentation

Path parameters

  • index string | array[string] Required

    A comma-separated list of index names; use _all or empty string to perform the operation on all indices

Query parameters

  • allow_no_indices boolean

    Whether to ignore if a wildcard indices expression resolves into no concrete indices. (This includes _all string or when no indices have been specified)

  • expand_wildcards string | array[string]

    Whether to expand wildcard expression to concrete indices that are open, closed or both.

  • flush boolean

    Specify whether the index should be flushed after performing the operation (default: true)

  • ignore_unavailable boolean

    Whether specified concrete indices should be ignored when unavailable (missing or closed)

  • max_num_segments number

    The number of segments the index should be merged into (default: dynamic)

  • only_expunge_deletes boolean

    Specify whether the operation should only expunge deleted documents

  • wait_for_completion boolean

    Should the request wait until the force merge is completed.

Responses

  • 200 application/json
    Hide response attributes Show response attributes object
    • _shards object
      Hide _shards attributes Show _shards attributes object
    • task string

      task contains a task id returned when wait_for_completion=false, you can use the task_id to get the status of the task at _tasks/
POST /{index}/_forcemerge 
curl \
 --request POST 'http://api.example.com/{index}/_forcemerge' \
 --header "Authorization: $API_KEY"
Response examples (200) 
{
  "_shards": {
    "failed": 42.0,
    "successful": 42.0,
    "total": 42.0,
    "failures": [
      {
        "index": "string",
        "node": "string",
        "reason": {
          "type": "string",
          "reason": "string",
          "stack_trace": "string",
          "caused_by": {},
          "root_cause": [
            {}
          ],
          "suppressed": [
            {}
          ]
        },
        "shard": 42.0,
        "status": "string"
      }
    ],
    "skipped": 42.0
  },
  "task": "string"
}

Licensing

Licensing APIs enable you to manage your licenses.

For more information about the different types of licenses, refer to Elastic subscriptions

Delete a model snapshot Added in 5.4.0

DELETE /_ml/anomaly_detectors/{job_id}/model_snapshots/{snapshot_id}
Api key auth Basic auth Bearer auth

You cannot delete the active model snapshot. To delete that snapshot, first revert to a different one. To identify the active model snapshot, refer to the model_snapshot_id in the results from the get jobs API.

Path parameters

  • job_id string Required

    Identifier for the anomaly detection job.

  • snapshot_id string Required

    Identifier for the model snapshot.

Responses

  • 200 application/json
    Hide response attribute Show response attribute object
    • acknowledged boolean Required

      For a successful response, this value is always true. On failure, an exception is returned instead.
DELETE /_ml/anomaly_detectors/{job_id}/model_snapshots/{snapshot_id} 
curl \
 --request DELETE 'http://api.example.com/_ml/anomaly_detectors/{job_id}/model_snapshots/{snapshot_id}' \
 --header "Authorization: $API_KEY"
Response examples (200)
A successful response when deleting an existing model snapshot. 
{
  "acknowledged": true
}

Start datafeeds Added in 5.5.0

POST /_ml/datafeeds/{datafeed_id}/_start
Api key auth Basic auth Bearer auth

A datafeed must be started in order to retrieve data from Elasticsearch. A datafeed can be started and stopped multiple times throughout its lifecycle.

Before you can start a datafeed, the anomaly detection job must be open. Otherwise, an error occurs.

If you restart a stopped datafeed, it continues processing input data from the next millisecond after it was stopped. If new data was indexed for that exact millisecond between stopping and starting, it will be ignored.

When Elasticsearch security features are enabled, your datafeed remembers which roles the last user to create or update it had at the time of creation or update and runs the query using those same roles. If you provided secondary authorization headers when you created or updated the datafeed, those credentials are used instead.

Path parameters

  • datafeed_id string Required

    A numerical character string that uniquely identifies the datafeed. This identifier can contain lowercase alphanumeric characters (a-z and 0-9), hyphens, and underscores. It must start and end with alphanumeric characters.

Query parameters

  • end string | number

    The time that the datafeed should end, which can be specified by using one of the following formats:

    • ISO 8601 format with milliseconds, for example 2017-01-22T06:00:00.000Z
    • ISO 8601 format without milliseconds, for example 2017-01-22T06:00:00+00:00
    • Milliseconds since the epoch, for example 1485061200000

    Date-time arguments using either of the ISO 8601 formats must have a time zone designator, where Z is accepted as an abbreviation for UTC time. When a URL is expected (for example, in browsers), the + used in time zone designators must be encoded as %2B. The end time value is exclusive. If you do not specify an end time, the datafeed runs continuously.

  • start string | number

    The time that the datafeed should begin, which can be specified by using the same formats as the end parameter. This value is inclusive. If you do not specify a start time and the datafeed is associated with a new anomaly detection job, the analysis starts from the earliest time for which data is available. If you restart a stopped datafeed and specify a start value that is earlier than the timestamp of the latest processed record, the datafeed continues from 1 millisecond after the timestamp of the latest processed record.

  • timeout string

    Specifies the amount of time to wait until a datafeed starts.

application/json

Body

  • end string | number

    A date and time, either as a string whose format can depend on the context (defaulting to ISO 8601), or a number of milliseconds since the Epoch. Elasticsearch accepts both as input, but will generally output a string representation.

    One of:
    DateTime string UnitMillis number

  • start string | number

    A date and time, either as a string whose format can depend on the context (defaulting to ISO 8601), or a number of milliseconds since the Epoch. Elasticsearch accepts both as input, but will generally output a string representation.

    One of:
    DateTime string UnitMillis number
  • timeout string

    A duration. Units can be nanos, micros, ms (milliseconds), s (seconds), m (minutes), h (hours) and d (days). Also accepts "0" without a unit and "-1" to indicate an unspecified value.

Responses

  • 200 application/json
    Hide response attributes Show response attributes object
    • node string | array[string] Required
    • started boolean Required

      For a successful response, this value is always true. On failure, an exception is returned instead.
POST /_ml/datafeeds/{datafeed_id}/_start 
curl \
 --request POST 'http://api.example.com/_ml/datafeeds/{datafeed_id}/_start' \
 --header "Authorization: $API_KEY" \
 --header "Content-Type: application/json" \
 --data '{"":"string","timeout":"string"}'
Request examples 
{
  "": "string",
  "timeout": "string"
}
Response examples (200) 
{
  "node": "string",
  "started": true
}