A newer version is available. For the latest information, see the current release documentation.

« Network policies Webhook namespace selectors »

› › ›

Prerequisites

To set up the network policies correctly you must know the operator Pod selector and the Kubernetes API server IP. They may vary depending on your environment and how the operator has been installed.

Operator Pod selector

edit

The operator Pod label depends on how the operator has been installed. Check the following table to know which label name is used in the network policies.

Installation method	Pod selector
YAML manifests	`control-plane: elastic-operator`
Helm Charts	`app.kubernetes.io/name: elastic-operator`

The examples in this section assume that the ECK operator has been installed using the Helm chart.

Kubernetes API server IP

edit

Run kubectl get endpoints kubernetes -n default to obtain the API server IP address for your cluster.

The following examples assume that the Kubernetes API server IP address is 10.0.0.1.

Isolating the operator

edit

The minimal set of permissions required are as follows:

Egress (outgoing)	TCP port 443 of the Kubernetes API server. UDP port 53 for DNS lookup. TCP port 9200 of Elasticsearch nodes on managed namespace.
Ingress (incoming)	TCP port 9443 for webhook requests from the Kubernetes API server.

apiVersion: networking.k8s.io/v1
kind: NetworkPolicy
metadata:
  name: elastic-operator
  namespace: elastic-system
spec:
  egress:
  - ports:
    - port: 53
      protocol: UDP
  - ports:
    - port: 443
      protocol: TCP
    to:
    - ipBlock:
        cidr: 10.0.0.1/32
  - ports:
    - port: 9200
      protocol: TCP
    to:
    - namespaceSelector:
        matchExpressions:
        - key: eck.k8s.elastic.co/tenant
          operator: In
          values:
          - team-a
          - team-b
      podSelector:
        matchLabels:
          common.k8s.elastic.co/type: elasticsearch
  ingress:
  - from:
    - ipBlock:
        cidr: 10.0.0.1/32
    ports:
    - port: 9443
      protocol: TCP
  podSelector:
    matchLabels:
      app.kubernetes.io/name: elastic-operator

Isolating Elasticsearch

edit

Egress (outgoing)	TCP port 9300 to other Elasticsearch nodes in the namespace (transport port). UDP port 53 for DNS lookup.
Ingress (incoming)	TCP port 9200 from the operator and other pods in the namespace.

apiVersion: networking.k8s.io/v1
kind: NetworkPolicy
metadata:
  name: eck-elasticsearch
  namespace: team-a
spec:
  egress:
  - ports:
    - port: 9300
      protocol: TCP
    to:
    - namespaceSelector:
        matchLabels:
          eck.k8s.elastic.co/tenant: team-a
      podSelector:
        matchLabels:
          common.k8s.elastic.co/type: elasticsearch
  - ports:
    - port: 53
      protocol: UDP
  ingress:
  - from:
    - namespaceSelector:
        matchLabels:
          eck.k8s.elastic.co/operator-name: elastic-operator
      podSelector:
        matchLabels:
          app.kubernetes.io/name: elastic-operator
    - namespaceSelector:
        matchLabels:
          eck.k8s.elastic.co/tenant: team-a
    # [Optional] Allow ingress controller pods from the ingress-nginx namespace.
    #- namespaceSelector:
    #    matchLabels:
    #      name: ingress-nginx
    ports:
    - port: 9200
      protocol: TCP
  - from:
    - namespaceSelector:
        matchLabels:
          eck.k8s.elastic.co/tenant: team-a
      podSelector:
        matchLabels:
          common.k8s.elastic.co/type: elasticsearch
    ports:
    - port: 9300
      protocol: TCP
  podSelector:
    matchLabels:
      common.k8s.elastic.co/type: elasticsearch

Isolating Kibana

edit

Egress (outgoing)	TCP port 9200 to Elasticsearch nodes in the namespace. UDP port 53 for DNS lookup.
Ingress (incoming)	TCP port 5601 from other pods in the namespace.

apiVersion: networking.k8s.io/v1
kind: NetworkPolicy
metadata:
  name: eck-kibana
  namespace: team-a
spec:
  egress:
  - ports:
    - port: 9200
      protocol: TCP
    to:
    - namespaceSelector:
        matchLabels:
          eck.k8s.elastic.co/tenant: team-a
      podSelector:
        matchLabels:
          common.k8s.elastic.co/type: elasticsearch
          # [Optional] Restrict to a single Elasticsearch cluster named hulk.
          # elasticsearch.k8s.elastic.co/cluster-name=hulk
  - ports:
    - port: 53
      protocol: UDP
    # [Optional] If Agent is deployed, this is to allow Kibana to access the Elastic Package Registry (https://epr.elastic.co).
    # - port: 443
    #   protocol: TCP
  ingress:
  - from:
    - namespaceSelector:
        matchLabels:
          eck.k8s.elastic.co/tenant: team-a
    # [Optional] Allow ingress controller pods from the ingress-nginx namespace.
    #- namespaceSelector:
    #    matchLabels:
    #      name: ingress-nginx
    ports:
    - port: 5601
      protocol: TCP
  podSelector:
    matchLabels:
      common.k8s.elastic.co/type: kibana

Isolating APM Server

edit

Egress (outgoing)	TCP port 9200 to Elasticsearch nodes in the namespace. TCP port 5601 to Kibana instances in the namespace. UDP port 53 for DNS lookup.
Ingress (incoming)	TCP port 8200 from other pods in the namespace.

apiVersion: networking.k8s.io/v1
kind: NetworkPolicy
metadata:
  name: eck-apm-server
  namespace: team-a
spec:
  egress:
  - ports:
    - port: 9200
      protocol: TCP
    to:
    - namespaceSelector:
        matchLabels:
          eck.k8s.elastic.co/tenant: team-a
      podSelector:
        matchLabels:
          common.k8s.elastic.co/type: elasticsearch
  - ports:
    - port: 5601
      protocol: TCP
    to:
    - namespaceSelector:
        matchLabels:
          eck.k8s.elastic.co/tenant: team-a
      podSelector:
        matchLabels:
          common.k8s.elastic.co/type: kibana
  - ports:
    - port: 53
      protocol: UDP
  ingress:
  - from:
    - namespaceSelector:
        matchLabels:
          eck.k8s.elastic.co/tenant: team-a
    # [Optional] Allow ingress controller pods from the ingress-nginx namespace.
    #- namespaceSelector:
    #    matchLabels:
    #      name: ingress-nginx
    ports:
    - port: 8200
      protocol: TCP
  podSelector:
    matchLabels:
      common.k8s.elastic.co/type: apm-server

Isolating Enterprise Search

edit

Egress (outgoing)	TCP port 9200 to Elasticsearch nodes in the namespace. UDP port 53 for DNS lookup.
Ingress (incoming)	TCP port 3002 from other pods in the namespace.

apiVersion: networking.k8s.io/v1
kind: NetworkPolicy
metadata:
  name: eck-enterprise-search
  namespace: team-a
spec:
  egress:
  - ports:
    - port: 9200
      protocol: TCP
    to:
    - namespaceSelector:
        matchLabels:
          eck.k8s.elastic.co/tenant: team-a
      podSelector:
        matchLabels:
          common.k8s.elastic.co/type: elasticsearch
  - ports:
    - port: 53
      protocol: UDP
  ingress:
  - from:
    - namespaceSelector:
        matchLabels:
          eck.k8s.elastic.co/tenant: team-a
    # [Optional] Allow ingress controller pods from the ingress-nginx namespace.
    #- namespaceSelector:
    #    matchLabels:
    #      name: ingress-nginx
    ports:
    - port: 3002
      protocol: TCP
  podSelector:
    matchLabels:
      common.k8s.elastic.co/type: enterprise-search

Isolating Beats

edit

Some Beats may require additional access rules than what is listed here. For example, Heartbeat will require a rule to allow access to the endpoint it is monitoring.

Egress (outgoing)

TCP port 9200 to Elasticsearch nodes in the namespace.
TCP port 5601 to Kibana instances in the namespace.
UDP port 53 for DNS lookup.

apiVersion: networking.k8s.io/v1
kind: NetworkPolicy
metadata:
  name: eck-beats
  namespace: team-a
spec:
  egress:
  - ports:
    - port: 9200
      protocol: TCP
    to:
    - namespaceSelector:
        matchLabels:
          eck.k8s.elastic.co/tenant: team-a
      podSelector:
        matchLabels:
          common.k8s.elastic.co/type: elasticsearch
  - ports:
    - port: 5601
      protocol: TCP
    to:
    - namespaceSelector:
        matchLabels:
          eck.k8s.elastic.co/tenant: team-a
      podSelector:
        matchLabels:
          common.k8s.elastic.co/type: kibana
  - ports:
    - port: 53
      protocol: UDP
  podSelector:
    matchLabels:
      common.k8s.elastic.co/type: beat

Isolating Elastic Agent and Fleet

edit

Some Elastic Agent policies may require additional access rules other than those listed here.

Egress (outgoing)

TCP port 9200 to Elasticsearch nodes in the namespace.
TCP port 5601 to Kibana instances in the namespace.
TCP port 8220 to Fleet instances in the namespace.
UDP port 53 for DNS lookup.

apiVersion: networking.k8s.io/v1
kind: NetworkPolicy
metadata:
  name: eck-agent
  namespace: team-a
spec:
  egress:
    - ports:
        - port: 8220
          protocol: TCP
      to:
        - namespaceSelector:
            matchLabels:
              eck.k8s.elastic.co/tenant: team-a
          podSelector:
            matchLabels:
              common.k8s.elastic.co/type: agent
    - ports:
        - port: 5601
          protocol: TCP
      to:
        - namespaceSelector:
            matchLabels:
              eck.k8s.elastic.co/tenant: team-a
          podSelector:
            matchLabels:
              common.k8s.elastic.co/type: kibana
    - ports:
        - port: 9200
          protocol: TCP
      to:
        - namespaceSelector:
            matchLabels:
              eck.k8s.elastic.co/tenant: team-a
          podSelector:
            matchLabels:
              common.k8s.elastic.co/type: elasticsearch
    - ports:
        - port: 53
          protocol: UDP
    - ports:
        - port: 443
          protocol: TCP
      to:
        - ipBlock:
            cidr: 10.0.0.1/32
  ingress:
    - from:
        - namespaceSelector:
            matchLabels:
              eck.k8s.elastic.co/tenant: team-a
      ports:
        - port: 8220
          protocol: TCP
  podSelector:
    matchLabels:
      common.k8s.elastic.co/type: agent

Isolating Logstash

edit

Logstash may require additional access rules than those listed here, depending on plugin usage.

Egress (outgoing)

TCP port 9200 to Elasticsearch nodes in the namespace.
UDP port 53 for DNS lookup.

apiVersion: networking.k8s.io/v1
kind: NetworkPolicy
metadata:
  name: eck-logstash
  namespace: team-a
spec:
  egress:
  - ports:
    - port: 9200
      protocol: TCP
    to:
    - namespaceSelector:
        matchLabels:
          eck.k8s.elastic.co/tenant: team-a
      podSelector:
        matchLabels:
          common.k8s.elastic.co/type: elasticsearch
  - ports:
    - port: 53
      protocol: UDP
  podSelector:
    matchLabels:
      common.k8s.elastic.co/type: logstash

« Network policies Webhook namespace selectors »