WARNING: The 1.x versions of Elasticsearch have passed their EOL dates. If you are running a 1.x version, we strongly advise you to upgrade.

This documentation is no longer maintained and may be removed. For the latest information, see the current Elasticsearch documentation.

› › ›

Mapping Geo Shapes

edit

Mapping Geo Shapes

edit

Like fields of type geo_point, geo-shapes have to be mapped explicitly before they can be used:

PUT /attractions
{
  "mappings": {
    "landmark": {
      "properties": {
        "name": {
          "type": "string"
        },
        "location": {
          "type": "geo_shape"
        }
      }
    }
  }
}

There are two important settings that you should consider changing precision and distance_error_pct.

precision

edit

The precision parameter controls the maximum length of the geohashes that are generated. It defaults to a precision of 9, which equates to a geohash with dimensions of about 5m x 5m. That is probably far more precise than you need.

The lower the precision, the fewer terms that will be indexed and the faster the search will be. But of course, the lower the precision, the less accurate are your geo-shapes. Consider just how accurate you need your shapes to be—even one or two levels of precision can represent a significant savings.

You can specify precisions by using distances—for example, 50m or 2km—but ultimately these distances are converted to the same levels as described in Geohashes.

distance_error_pct

edit

When indexing a polygon, the big central continuous part can be represented cheaply by a short geohash. It is the edges that matter. Edges require much smaller geohashes to represent them with any accuracy.

If you’re indexing a small landmark, you want the edges to be quite accurate. It wouldn’t be good to have one monument overlapping with the next. When indexing an entire country, you don’t need quite as much precision. Fifty meters here or there isn’t likely to start any wars.

The distance_error_pct specifies the maximum allowable error based on the size of the shape. It defaults to 0.025, or 2.5%. In other words, big shapes (like countries) are allowed to have fuzzier edges than small shapes (like monuments).

The default of 0.025 is a good starting point, but the more error that is allowed, the fewer terms that are required to index a shape.

« Geo Shapes Indexing Geo Shapes »