This documentation contains work-in-progress information for future Elastic Stack and Cloud releases. Use the version selector to view supported release docs. It also contains some Elastic Cloud serverless information. Check out our serverless docs for more details.
« Run downsampling manually Logs data stream »
Elastic Docs ›Elasticsearch Guide [master] ›Data streams ›Time series data stream (TSDS)

Reindex a time series data stream (TSDS)

edit

Reindex a time series data stream (TSDS)

edit

Introduction

edit

With reindexing, you can copy documents from an old time-series data stream (TSDS) to a new one. Data streams support reindexing in general, with a few restrictions. Still, time-series data streams introduce additional challenges due to tight control on the accepted timestamp range for each backing index they contain. Direct use of the reindex API would likely error out due to attempting to insert documents with timestamps that are outside the current acceptance window.

To avoid these limitations, use the process that is outlined below:

  1. Create an index template for the destination data stream that will contain the re-indexed data.

  2. Update the template to

    1. Set index.time_series.start_time and index.time_series.end_time index settings to match the lowest and highest @timestamp values in the old data stream.
    2. Set the index.number_of_shards index setting to the sum of all primary shards of all backing indices of the old data stream.
    3. Set index.number_of_replicas to zero and unset the index.lifecycle.name index setting.
  3. Run the reindex operation to completion.
  4. Revert the overriden index settings in the destination index template.
  5. Invoke the rollover api to create a new backing index that can receive new documents.

This process only applies to time-series data streams without downsampling configuration. Data streams with downsampling can only be re-indexed by re-indexing their backing indexes individually and adding them to an empty destination data stream.

In what follows, we elaborate on each step of the process with examples.

Create a TSDS template to accept old documents

edit

Consider a TSDS with the following template:

resp = client.cluster.put_component_template(
    name="source_template",
    template={
        "settings": {
            "index": {
                "number_of_replicas": 2,
                "number_of_shards": 2,
                "mode": "time_series",
                "routing_path": [
                    "metricset"
                ]
            }
        },
        "mappings": {
            "properties": {
                "@timestamp": {
                    "type": "date"
                },
                "metricset": {
                    "type": "keyword",
                    "time_series_dimension": True
                },
                "k8s": {
                    "properties": {
                        "tx": {
                            "type": "long"
                        },
                        "rx": {
                            "type": "long"
                        }
                    }
                }
            }
        }
    },
)
print(resp)

resp1 = client.indices.put_index_template(
    name="1",
    index_patterns=[
        "k8s*"
    ],
    composed_of=[
        "source_template"
    ],
    data_stream={},
)
print(resp1)
response = client.cluster.put_component_template(
  name: 'source_template',
  body: {
    template: {
      settings: {
        index: {
          number_of_replicas: 2,
          number_of_shards: 2,
          mode: 'time_series',
          routing_path: [
            'metricset'
          ]
        }
      },
      mappings: {
        properties: {
          "@timestamp": {
            type: 'date'
          },
          metricset: {
            type: 'keyword',
            time_series_dimension: true
          },
          "k8s": {
            properties: {
              tx: {
                type: 'long'
              },
              rx: {
                type: 'long'
              }
            }
          }
        }
      }
    }
  }
)
puts response

response = client.indices.put_index_template(
  name: 1,
  body: {
    index_patterns: [
      'k8s*'
    ],
    composed_of: [
      'source_template'
    ],
    data_stream: {}
  }
)
puts response
const response = await client.cluster.putComponentTemplate({
  name: "source_template",
  template: {
    settings: {
      index: {
        number_of_replicas: 2,
        number_of_shards: 2,
        mode: "time_series",
        routing_path: ["metricset"],
      },
    },
    mappings: {
      properties: {
        "@timestamp": {
          type: "date",
        },
        metricset: {
          type: "keyword",
          time_series_dimension: true,
        },
        k8s: {
          properties: {
            tx: {
              type: "long",
            },
            rx: {
              type: "long",
            },
          },
        },
      },
    },
  },
});
console.log(response);

const response1 = await client.indices.putIndexTemplate({
  name: 1,
  index_patterns: ["k8s*"],
  composed_of: ["source_template"],
  data_stream: {},
});
console.log(response1);
POST /_component_template/source_template
{
  "template": {
    "settings": {
      "index": {
        "number_of_replicas": 2,
        "number_of_shards": 2,
        "mode": "time_series",
        "routing_path": [ "metricset" ]
      }
    },
    "mappings": {
      "properties": {
        "@timestamp": { "type": "date" },
        "metricset": {
          "type": "keyword",
          "time_series_dimension": true
        },
        "k8s": {
          "properties": {
            "tx": { "type": "long" },
            "rx": { "type": "long" }
          }
        }
      }
    }
  }
}

POST /_index_template/1
{
  "index_patterns": [
    "k8s*"
  ],
  "composed_of": [
    "source_template"
  ],
  "data_stream": {}
}

A possible output of /k8s/_settings looks like:

{
  ".ds-k8s-2023.09.01-000002": {
    "settings": {
      "index": {
        "mode": "time_series",
        "routing": {
          "allocation": {
            "include": {
              "_tier_preference": "data_hot"
            }
          }
        },
        "hidden": "true",
        "number_of_shards": "2",
        "time_series": {
          "end_time": "2023-09-01T14:00:00.000Z",
          "start_time": "2023-09-01T10:00:00.000Z"
        },
        "provided_name": ".ds-k9s-2023.09.01-000002",
        "creation_date": "1694439857608",
        "number_of_replicas": "2",
        "routing_path": [
          "metricset"
        ],
        ...
      }
    }
  },
  ".ds-k8s-2023.09.01-000001": {
    "settings": {
      "index": {
        "mode": "time_series",
        "routing": {
          "allocation": {
            "include": {
              "_tier_preference": "data_hot"
            }
          }
        },
        "hidden": "true",
        "number_of_shards": "2",
        "time_series": {
          "end_time": "2023-09-01T10:00:00.000Z",
          "start_time": "2023-09-01T06:00:00.000Z"
        },
        "provided_name": ".ds-k9s-2023.09.01-000001",
        "creation_date": "1694439837126",
        "number_of_replicas": "2",
        "routing_path": [
          "metricset"
        ],
        ...
      }
    }
  }
}

To reindex this TSDS, do not to re-use its index template in the destination data stream, to avoid impacting its functionality. Instead, clone the template of the source TSDS and apply the following modifications:

  • Set index.time_series.start_time and index.time_series.end_time index settings explicitly. Their values should be based on the lowest and highest @timestamp values in the data stream to reindex. This way, the initial backing index can load all data that is contained in the source data stream.
  • Set index.number_of_shards index setting to the sum of all primary shards of all backing indices of the source data stream. This helps maintain the same level of search parallelism, as each shard is processed in a separate thread (or more).
  • Unset the index.lifecycle.name index setting, if any. This prevents ILM from modifying the destination data stream during reindexing.
  • (Optional) Set index.number_of_replicas to zero. This helps speed up the reindex operation. Since the data gets copied, there is limited risk of data loss due to lack of replicas.

Using the example above as source TSDS, the template for the destination TSDS would be:

resp = client.cluster.put_component_template(
    name="destination_template",
    template={
        "settings": {
            "index": {
                "number_of_replicas": 0,
                "number_of_shards": 4,
                "mode": "time_series",
                "routing_path": [
                    "metricset"
                ],
                "time_series": {
                    "end_time": "2023-09-01T14:00:00.000Z",
                    "start_time": "2023-09-01T06:00:00.000Z"
                }
            }
        },
        "mappings": {
            "properties": {
                "@timestamp": {
                    "type": "date"
                },
                "metricset": {
                    "type": "keyword",
                    "time_series_dimension": True
                },
                "k8s": {
                    "properties": {
                        "tx": {
                            "type": "long"
                        },
                        "rx": {
                            "type": "long"
                        }
                    }
                }
            }
        }
    },
)
print(resp)

resp1 = client.indices.put_index_template(
    name="2",
    index_patterns=[
        "k8s*"
    ],
    composed_of=[
        "destination_template"
    ],
    data_stream={},
)
print(resp1)
const response = await client.cluster.putComponentTemplate({
  name: "destination_template",
  template: {
    settings: {
      index: {
        number_of_replicas: 0,
        number_of_shards: 4,
        mode: "time_series",
        routing_path: ["metricset"],
        time_series: {
          end_time: "2023-09-01T14:00:00.000Z",
          start_time: "2023-09-01T06:00:00.000Z",
        },
      },
    },
    mappings: {
      properties: {
        "@timestamp": {
          type: "date",
        },
        metricset: {
          type: "keyword",
          time_series_dimension: true,
        },
        k8s: {
          properties: {
            tx: {
              type: "long",
            },
            rx: {
              type: "long",
            },
          },
        },
      },
    },
  },
});
console.log(response);

const response1 = await client.indices.putIndexTemplate({
  name: 2,
  index_patterns: ["k8s*"],
  composed_of: ["destination_template"],
  data_stream: {},
});
console.log(response1);
POST /_component_template/destination_template
{
  "template": {
    "settings": {
      "index": {
        "number_of_replicas": 0,
        "number_of_shards": 4,
        "mode": "time_series",
        "routing_path": [ "metricset" ],
        "time_series": {
          "end_time": "2023-09-01T14:00:00.000Z",
          "start_time": "2023-09-01T06:00:00.000Z"
        }
      }
    },
    "mappings": {
      "properties": {
        "@timestamp": { "type": "date" },
        "metricset": {
          "type": "keyword",
          "time_series_dimension": true
        },
        "k8s": {
          "properties": {
            "tx": { "type": "long" },
            "rx": { "type": "long" }
          }
        }
      }
    }
  }
}

POST /_index_template/2
{
  "index_patterns": [
    "k8s*"
  ],
  "composed_of": [
    "destination_template"
  ],
  "data_stream": {}
}

Reindex

edit

Invoke the reindex api, for instance:

resp = client.reindex(
    source={
        "index": "k8s"
    },
    dest={
        "index": "k9s",
        "op_type": "create"
    },
)
print(resp)
response = client.reindex(
  body: {
    source: {
      index: 'k8s'
    },
    dest: {
      index: 'k9s',
      op_type: 'create'
    }
  }
)
puts response
const response = await client.reindex({
  source: {
    index: "k8s",
  },
  dest: {
    index: "k9s",
    op_type: "create",
  },
});
console.log(response);
POST /_reindex
{
  "source": {
    "index": "k8s"
  },
  "dest": {
    "index": "k9s",
    "op_type": "create"
  }
}

Restore the destination index template

edit

Once the reindexing operation completes, restore the index template for the destination TSDS as follows:

  • Remove the overrides for index.time_series.start_time and index.time_series.end_time.
  • Restore the values of index.number_of_shards, index.number_of_replicas and index.lifecycle.name as applicable.

Using the previous example, the destination template is modified as follows:

resp = client.cluster.put_component_template(
    name="destination_template",
    template={
        "settings": {
            "index": {
                "number_of_replicas": 2,
                "number_of_shards": 2,
                "mode": "time_series",
                "routing_path": [
                    "metricset"
                ]
            }
        },
        "mappings": {
            "properties": {
                "@timestamp": {
                    "type": "date"
                },
                "metricset": {
                    "type": "keyword",
                    "time_series_dimension": True
                },
                "k8s": {
                    "properties": {
                        "tx": {
                            "type": "long"
                        },
                        "rx": {
                            "type": "long"
                        }
                    }
                }
            }
        }
    },
)
print(resp)
response = client.cluster.put_component_template(
  name: 'destination_template',
  body: {
    template: {
      settings: {
        index: {
          number_of_replicas: 2,
          number_of_shards: 2,
          mode: 'time_series',
          routing_path: [
            'metricset'
          ]
        }
      },
      mappings: {
        properties: {
          "@timestamp": {
            type: 'date'
          },
          metricset: {
            type: 'keyword',
            time_series_dimension: true
          },
          "k8s": {
            properties: {
              tx: {
                type: 'long'
              },
              rx: {
                type: 'long'
              }
            }
          }
        }
      }
    }
  }
)
puts response
const response = await client.cluster.putComponentTemplate({
  name: "destination_template",
  template: {
    settings: {
      index: {
        number_of_replicas: 2,
        number_of_shards: 2,
        mode: "time_series",
        routing_path: ["metricset"],
      },
    },
    mappings: {
      properties: {
        "@timestamp": {
          type: "date",
        },
        metricset: {
          type: "keyword",
          time_series_dimension: true,
        },
        k8s: {
          properties: {
            tx: {
              type: "long",
            },
            rx: {
              type: "long",
            },
          },
        },
      },
    },
  },
});
console.log(response);
POST /_component_template/destination_template
{
  "template": {
    "settings": {
      "index": {
        "number_of_replicas": 2,
        "number_of_shards": 2,
        "mode": "time_series",
        "routing_path": [ "metricset" ]
      }
    },
    "mappings": {
      "properties": {
        "@timestamp": { "type": "date" },
        "metricset": {
          "type": "keyword",
          "time_series_dimension": true
        },
        "k8s": {
          "properties": {
            "tx": { "type": "long" },
            "rx": { "type": "long" }
          }
        }
      }
    }
  }
}

Next, Invoke the rollover api on the destination data stream without any conditions set.

resp = client.indices.rollover(
    alias="k9s",
)
print(resp)
response = client.indices.rollover(
  alias: 'k9s'
)
puts response
const response = await client.indices.rollover({
  alias: "k9s",
});
console.log(response);
POST /k9s/_rollover/

This creates a new backing index with the updated index settings. The destination data stream is now ready to accept new documents.

Note that the initial backing index can still accept documents within the range of timestamps derived from the source data stream. If this is not desired, mark it as read-only explicitly.

« Run downsampling manually Logs data stream »