Kafka input

edit

Use the kafka input to read from topics in a Kafka cluster.

To configure this input, specify a list of one or more hosts in the cluster to bootstrap the connection with, a list of topics to track, and a group_id for the connection.

Example configuration:

filebeat.inputs:
- type: kafka
  hosts:
    - kafka-broker-1:9092
    - kafka-broker-2:9092
  topics: ["my-topic"]
  group_id: "filebeat"

The following example shows how to use the kafka input to ingest data from Microsoft Azure Event Hubs that have Kafka compatibility enabled:

filebeat.inputs:
- type: kafka
  hosts: ["<your event hub namespace>.servicebus.windows.net:9093"]
  topics: ["<your event hub instance>"]
  group_id: "<your consumer group>"

  username: "$ConnectionString"
  password: "<your connection string>"
  ssl.enabled: true

For more details on the mapping between Kafka and Event Hubs configuration parameters, see the Azure documentation.

Compatibility

edit

This input works with all Kafka versions in between 0.11 and 2.8.0. Older versions might work as well, but are not supported.

Configuration options

edit

The kafka input supports the following configuration options plus the Common options described later.

If you’re using Elastic Agent with a Kafka input and need to increase throughput, we recommend scaling horizontally by additional Elastic Agents to read from the Kafka topic. Note that each Elastic Agent reads concurrently from each of the partitions it has been assigned.

hosts
edit

A list of Kafka bootstrapping hosts (brokers) for this cluster.

topics
edit

A list of topics to read from.

group_id
edit

The Kafka consumer group id.

client_id
edit

The Kafka client id (optional).

version
edit

The version of the Kafka protocol to use (defaults to "1.0.0").

initial_offset
edit

The initial offset to start reading, either "oldest" or "newest". Defaults to "oldest".

connect_backoff

edit

How long to wait before trying to reconnect to the kafka cluster after a fatal error. Default is 30s.

consume_backoff

edit

How long to wait before retrying a failed read. Default is 2s.

max_wait_time

edit

How long to wait for the minimum number of input bytes while reading. Default is 250ms.

wait_close

edit

When shutting down, how long to wait for in-flight messages to be delivered and acknowledged.

isolation_level

edit

This configures the Kafka group isolation level:

  • "read_uncommitted" returns all messages in the message channel.
  • "read_committed" hides messages that are part of an aborted transaction.

The default is "read_uncommitted".

fetch

edit

Kafka fetch settings:

min
The minimum number of bytes to wait for. Defaults to 1.
default
The default number of bytes to read per request. Defaults to 1MB.
max
The maximum number of bytes to read per request. Defaults to 0 (no limit).

expand_event_list_from_field

edit

If the fileset using this input expects to receive multiple messages bundled under a specific field then the config option expand_event_list_from_field value can be assigned the name of the field. For example in the case of azure filesets the events are found under the json object "records".

{
"records": [ {event1}, {event2}]
}

This setting will be able to split the messages under the group value (records) into separate events.

rebalance

edit

Kafka rebalance settings:

strategy
Either "range" or "roundrobin". Defaults to "range".
timeout
How long to wait for an attempted rebalance. Defaults to 60s.
max_retries
How many times to retry if rebalancing fails. Defaults to 4.
retry_backoff
How long to wait after an unsuccessful rebalance attempt. Defaults to 2s.

sasl.mechanism

edit

The SASL mechanism to use when connecting to Kafka. It can be one of:

  • PLAIN for SASL/PLAIN.
  • SCRAM-SHA-256 for SCRAM-SHA-256.
  • SCRAM-SHA-512 for SCRAM-SHA-512.

If sasl.mechanism is not set, PLAIN is used if username and password are provided. Otherwise, SASL authentication is disabled.

To use GSSAPI mechanism to authenticate with Kerberos, you must leave this field empty, and use the kerberos options.

kerberos

edit

This functionality is in beta and is subject to change. The design and code is less mature than official GA features and is being provided as-is with no warranties. Beta features are not subject to the support SLA of official GA features.

Configuration options for Kerberos authentication.

See Kerberos for more information.

parsers
edit

This option expects a list of parsers that the payload has to go through.

Available parsers:

  • ndjson
  • multiline
ndjson
edit

These options make it possible for Filebeat to decode the payload as JSON messages.

Example configuration:

- ndjson:
  target: ""
  add_error_key: true
  message_key: log
target
The name of the new JSON object that should contain the parsed key value pairs. If you leave it empty, the new keys will go under root.
overwrite_keys
Values from the decoded JSON object overwrite the fields that Filebeat normally adds (type, source, offset, etc.) in case of conflicts. Disable it if you want to keep previously added values.
expand_keys
If this setting is enabled, Filebeat will recursively de-dot keys in the decoded JSON, and expand them into a hierarchical object structure. For example, {"a.b.c": 123} would be expanded into {"a":{"b":{"c":123}}}. This setting should be enabled when the input is produced by an ECS logger.
add_error_key
If this setting is enabled, Filebeat adds an "error.message" and "error.type: json" key in case of JSON unmarshalling errors or when a message_key is defined in the configuration but cannot be used.
message_key
An optional configuration setting that specifies a JSON key on which to apply the line filtering and multiline settings. If specified the key must be at the top level in the JSON object and the value associated with the key must be a string, otherwise no filtering or multiline aggregation will occur.
document_id
Option configuration setting that specifies the JSON key to set the document id. If configured, the field will be removed from the original JSON document and stored in @metadata._id
ignore_decoding_error
An optional configuration setting that specifies if JSON decoding errors should be logged or not. If set to true, errors will not be logged. The default is false.
multiline
edit

Options that control how Filebeat deals with log messages that span multiple lines. See Multiline messages for more information about configuring multiline options.

Common options

edit

The following configuration options are supported by all inputs.

enabled
edit

Use the enabled option to enable and disable inputs. By default, enabled is set to true.

tags
edit

A list of tags that Filebeat includes in the tags field of each published event. Tags make it easy to select specific events in Kibana or apply conditional filtering in Logstash. These tags will be appended to the list of tags specified in the general configuration.

Example:

filebeat.inputs:
- type: kafka
  . . .
  tags: ["json"]
fields
edit

Optional fields that you can specify to add additional information to the output. For example, you might add fields that you can use for filtering log data. Fields can be scalar values, arrays, dictionaries, or any nested combination of these. By default, the fields that you specify here will be grouped under a fields sub-dictionary in the output document. To store the custom fields as top-level fields, set the fields_under_root option to true. If a duplicate field is declared in the general configuration, then its value will be overwritten by the value declared here.

filebeat.inputs:
- type: kafka
  . . .
  fields:
    app_id: query_engine_12
fields_under_root
edit

If this option is set to true, the custom fields are stored as top-level fields in the output document instead of being grouped under a fields sub-dictionary. If the custom field names conflict with other field names added by Filebeat, then the custom fields overwrite the other fields.

processors
edit

A list of processors to apply to the input data.

See Processors for information about specifying processors in your config.

pipeline
edit

The ingest pipeline ID to set for the events generated by this input.

The pipeline ID can also be configured in the Elasticsearch output, but this option usually results in simpler configuration files. If the pipeline is configured both in the input and output, the option from the input is used.

keep_null
edit

If this option is set to true, fields with null values will be published in the output document. By default, keep_null is set to false.

index
edit

If present, this formatted string overrides the index for events from this input (for elasticsearch outputs), or sets the raw_index field of the event’s metadata (for other outputs). This string can only refer to the agent name and version and the event timestamp; for access to dynamic fields, use output.elasticsearch.index or a processor.

Example value: "%{[agent.name]}-myindex-%{+yyyy.MM.dd}" might expand to "filebeat-myindex-2019.11.01".

publisher_pipeline.disable_host
edit

By default, all events contain host.name. This option can be set to true to disable the addition of this field to all events. The default value is false.