IMPORTANT: No additional bug fixes or documentation updates will be released for this version. For the latest information, see the current release documentation.

« Secrets keystore for secure settings Repositories for APT and YUM »

› ›

Heartbeat command reference

edit

Heartbeat command reference

edit

Heartbeat provides a command-line interface for starting Heartbeat and performing common tasks, like testing configuration files.

The command-line also supports global flags for controlling global behaviors.

Use sudo to run the following commands if:

the config file is owned by root, or
Heartbeat is configured to capture data that requires root access

Some of the features described here require an Elastic license. For more information, see https://www.elastic.co/subscriptions and License Management.

Commands
`export`	Exports the configuration, index template, or ILM policy to stdout.
`help`	Shows help for any command.
`keystore`	Manages the secrets keystore.
`run`	Runs Heartbeat. This command is used by default if you start Heartbeat without specifying a command.
`setup`	Sets up the initial environment, including the ES index template, and ILM policy and write alias.
`test`	Tests the configuration.
`version`	Shows information about the current version.

Also see Global flags.

`export` command

edit

Exports the configuration, index template, or ILM policy to stdout. You can use this command to quickly view your configuration or see the contents of the index template or the ILM policy.

SYNOPSIS

heartbeat export SUBCOMMAND [FLAGS]

SUBCOMMANDS

config: Exports the current configuration to stdout. If you use the -c flag, this command exports the configuration that’s defined in the specified file.
template: Exports the index template to stdout. You can specify the --es.version and --index flags to further define what gets exported. Furthermore you can export the template to a file instead of stdout by defining a directory via --dir.

ilm-policy: Exports the index lifecycle management policy to stdout. You can specify the --es.version and a --dir to which the policy should be exported as a file rather than exporting to stdout.

FLAGS

--es.version VERSION: When used with template, exports an index template that is compatible with the specified version. When used with ilm-policy, exports the ILM policy if the specified ES version is enabled for ILM.
-h, --help: Shows help for the export command.
--index BASE_NAME: When used with template, sets the base name to use for the index template. If this flag is not specified, the default base name is heartbeat.
--dir DIRNAME: Define a directory to which the template, pipelines, and ILM policy should be exported to as files instead of printing them to stdout.

Also see Global flags.

EXAMPLES

heartbeat export config
heartbeat export template --es.version 8.6.2 --index myindexname

`help` command

edit

Shows help for any command. If no command is specified, shows help for the run command.

SYNOPSIS

heartbeat help COMMAND_NAME [FLAGS]

COMMAND_NAME: Specifies the name of the command to show help for.

FLAGS

-h, --help: Shows help for the help command.

Also see Global flags.

EXAMPLE

heartbeat help export

`keystore` command

edit

Manages the secrets keystore.

SYNOPSIS

heartbeat keystore SUBCOMMAND [FLAGS]

SUBCOMMANDS

add KEY: Adds the specified key to the keystore. Use the --force flag to overwrite an existing key. Use the --stdin flag to pass the value through stdin.
create: Creates a keystore to hold secrets. Use the --force flag to overwrite the existing keystore.
list: Lists the keys in the keystore.
remove KEY: Removes the specified key from the keystore.

FLAGS

--force: Valid with the add and create subcommands. When used with add, overwrites the specified key. When used with create, overwrites the keystore.
--stdin: When used with add, uses the stdin as the source of the key’s value.
-h, --help: Shows help for the keystore command.

Also see Global flags.

EXAMPLES

heartbeat keystore create
heartbeat keystore add ES_PWD
heartbeat keystore remove ES_PWD
heartbeat keystore list

See Secrets keystore for more examples.

`run` command

edit

Runs Heartbeat. This command is used by default if you start Heartbeat without specifying a command.

SYNOPSIS

heartbeat run [FLAGS]

Or:

heartbeat [FLAGS]

FLAGS

-N, --N: Disables publishing for testing purposes. This option disables all outputs except the File output.
--cpuprofile FILE: Writes CPU profile data to the specified file. This option is useful for troubleshooting Heartbeat.
-h, --help: Shows help for the run command.
--httpprof [HOST]:PORT: Starts an http server for profiling. This option is useful for troubleshooting and profiling Heartbeat.
--memprofile FILE: Writes memory profile data to the specified output file. This option is useful for troubleshooting Heartbeat.
--system.hostfs MOUNT_POINT: Specifies the mount point of the host’s filesystem for use in monitoring a host. This flag is depricated, and an alternate hostfs should be specified via the hostfs module config value.

Also see Global flags.

EXAMPLE

heartbeat run -e

Or:

heartbeat -e

`setup` command

edit

Sets up the initial environment, including the ES index template, and ILM policy and write alias

The index template ensures that fields are mapped correctly in Elasticsearch. If index lifecycle management is enabled it also ensures that the defined ILM policy and write alias are connected to the indices matching the index template. The ILM policy takes care of the lifecycle of an index, when to do a rollover, when to move an index from the hot phase to the next phase, etc.

This command sets up the environment without actually running Heartbeat and ingesting data. Specify optional flags to set up a subset of assets.

SYNOPSIS

heartbeat setup [FLAGS]

FLAGS

-h, --help: Shows help for the setup command.
--index-management: Sets up components related to Elasticsearch index management including template, ILM policy, and write alias (if supported and configured).

Also see Global flags.

EXAMPLES

heartbeat setup --index-management

`test` command

edit

Tests the configuration.

SYNOPSIS

heartbeat test SUBCOMMAND [FLAGS]

SUBCOMMANDS

config: Tests the configuration settings.
output: Tests that Heartbeat can connect to the output by using the current settings.

FLAGS

-h, --help: Shows help for the test command.

Also see Global flags.

EXAMPLE

heartbeat test config

`version` command

edit

Shows information about the current version.

SYNOPSIS

heartbeat version [FLAGS]

FLAGS

-h, --help: Shows help for the version command.

Also see Global flags.

EXAMPLE

heartbeat version

Global flags

edit

These global flags are available whenever you run Heartbeat.

-E, --E "SETTING_NAME=VALUE"

Overrides a specific configuration setting. You can specify multiple overrides. For example:

heartbeat -E "name=mybeat" -E "output.elasticsearch.hosts=['http://myhost:9200']"

This setting is applied to the currently running Heartbeat process. The Heartbeat configuration file is not changed.

-c, --c FILE

Specifies the configuration file to use for Heartbeat. The file you specify here is relative to path.config. If the -c flag is not specified, the default config file, heartbeat.yml, is used.

-d, --d SELECTORS

Enables debugging for the specified selectors. For the selectors, you can specify a comma-separated list of components, or you can use -d "*" to enable debugging for all components. For example, -d "publisher" displays all the publisher-related messages.

-e, --e

Logs to stderr and disables syslog/file output.

-environment

For logging purposes, specifies the environment that Heartbeat is running in. This setting is used to select a default log output when no log output is configured. Supported values are: systemd, container, macos_service, and windows_service. If systemd or container is specified, Heartbeat will log to stdout and stderr by default.

--path.config

Sets the path for configuration files. See the Directory layout section for details.

--path.data

Sets the path for data files. See the Directory layout section for details.

--path.home

Sets the path for miscellaneous files. See the Directory layout section for details.

--path.logs

Sets the path for log files. See the Directory layout section for details.

--strict.perms

Sets strict permission checking on configuration files. The default is -strict.perms=true. See Config file ownership and permissions for more information.

-v, --v

Logs INFO-level messages.

« Secrets keystore for secure settings Repositories for APT and YUM »

Heartbeat command reference

Heartbeat command reference

export command

help command

keystore command

run command

setup command

test command

version command

Global flags

`export` command

`help` command

`keystore` command

`run` command

`setup` command

`test` command

`version` command