WARNING: Version 5.6 of Metricbeat has passed its EOL date.

This documentation is no longer being maintained and may be removed. If you are running this version, we strongly advise you to upgrade. For the latest information, see the current release documentation.

« Console Output Output Codec »
Elastic Docs ›Metricbeat Reference [5.6] ›Configuring Metricbeat ›Configuration Options (Reference)

SSL

edit

SSL

edit

You can specify SSL options for any output that supports SSL.

Example configuration:

output.elasticsearch:
  hosts: ["192.168.1.42:9200"]
  ssl.certificate_authorities: ["/etc/pki/root/ca.pem"]
  ssl.certificate: "/etc/pki/client/cert.pem"
  ssl.key: "/etc/pki/client/cert.key"

SSL Options

edit

You can specify the following options in the ssl section of the metricbeat.yml config file:

enabled

edit

The enabled setting can be used to disable the ssl configuration by setting it to false. The default value is true.

Note: SSL settings are disabled if either enabled is set to false or the ssl section is missing.

certificate_authorities

edit

The list of root certificates for server verifications. If certificate_authorities is empty or not set, the trusted certificate authorities of the host system are used.

certificate: "/etc/pki/client/cert.pem"

edit

The path to the certificate for SSL client authentication. If the certificate is not specified, client authentication is not available. The connection might fail if the server requests client authentication. If the SSL server does not require client authentication, the certificate will be loaded, but not requested or used by the server.

When this option is configured, the key: "/etc/pki/client/cert.key" option is also required.

key: "/etc/pki/client/cert.key"

edit

The client certificate key used for client authentication. This option is required if certificate: "/etc/pki/client/cert.pem" is specified.

key_passphrase

edit

The passphrase used to decrypt an encrypted key stored in the configured key file.

supported_protocols

edit

List of allowed SSL/TLS versions. If SSL/TLS server decides for protocol versions not configured, the connection will be dropped during or after the handshake. The setting is a list of allowed protocol versions: SSLv3, TLSv1 for TLS version 1.0, TLSv1.0, TLSv1.1 and TLSv1.2.

The default value is [TLSv1.0, TLSv1.1, TLSv1.2].

verification_mode

edit

This option controls whether the client verifies server certificates and host names. The values none and full can be used. If verification_mode is set to none, all server host names and certificates are accepted. In this mode, TLS-based connections are susceptible to man-in-the-middle attacks. Use this option for testing only.

The default is full.

cipher_suites

edit

The list of cipher suites to use. The first entry has the highest priority. If this option is omitted, the Go crypto library’s default suites are used (recommended).

The following cipher suites are available:

  • RSA-RC4-128-SHA (disabled by default - RC4 not recommended)
  • RSA-3DES-CBC3-SHA
  • RSA-AES-128-CBC-SHA
  • RSA-AES-256-CBC-SHA
  • ECDHE-ECDSA-RC4-128-SHA (disabled by default - RC4 not recommended)
  • ECDHE-ECDSA-AES-128-CBC-SHA
  • ECDHE-ECDSA-AES-256-CBC-SHA
  • ECDHE-RSA-RC4-128-SHA (disabled by default- RC4 not recommended)
  • ECDHE-RSA-3DES-CBC3-SHA
  • ECDHE-RSA-AES-128-CBC-SHA
  • ECDHE-RSA-AES-256-CBC-SHA
  • ECDHE-RSA-AES-128-GCM-SHA256 (TLS 1.2 only)
  • ECDHE-ECDSA-AES-128-GCM-SHA256 (TLS 1.2 only)
  • ECDHE-RSA-AES-256-GCM-SHA384 (TLS 1.2 only)
  • ECDHE-ECDSA-AES-256-GCM-SHA384 (TLS 1.2 only)

Here is a list of acronyms used in defining the cipher suites:

  • 3DES: Cipher suites using triple DES
  • AES-128/256: Cipher suites using AES with 128/256-bit keys.
  • CBC: Cipher using Cipher Block Chaining as block cipher mode.
  • ECDHE: Cipher suites using Elliptic Curve Diffie-Hellman (DH) ephemeral key exchange.
  • ECDSA: Cipher suites using Elliptic Curve Digital Signature Algorithm for authentication.
  • GCM: Galois/Counter mode is used for symmetric key cryptography.
  • RC4: Cipher suites using RC4.
  • RSA: Cipher suites using RSA.
  • SHA, SHA256, SHA384: Cipher suites using SHA-1, SHA-256 or SHA-384.

curve_types

edit

The list of curve types for ECDHE (Elliptic Curve Diffie-Hellman ephemeral key exchange).

The following elliptic curve types are available:

  • P-256
  • P-384
  • P-521

renegotiation

edit

This configures what types of TLS renegotiation are supported. The valid options are never, once, and freely. The default value is never.

  • never - Disables renegotiation.
  • once - Allows a remote server to request renegotiation once per connection.
  • freely - Allows a remote server to repeatedly request renegotiation.
« Console Output Output Codec »