WARNING: Version 6.1 of Metricbeat has passed its EOL date.

This documentation is no longer being maintained and may be removed. If you are running this version, we strongly advise you to upgrade. For the latest information, see the current release documentation.

« Configure the Elasticsearch output Configure the Kafka output »
Elastic Docs ›Metricbeat Reference [6.1] ›Configuring Metricbeat ›Configure the output

Configure the Logstash output

edit

Configure the Logstash output

edit

The Logstash output sends events directly to Logstash by using the lumberjack protocol, which runs over TCP. Logstash allows for additional processing and routing of generated events.

Prerequisite

To use Logstash as an output, you must install and configure the Beats input plugin for Logstash.

If you want to use Logstash to perform additional processing on the data collected by Metricbeat, you need to configure Metricbeat to use Logstash.

To do this, you edit the Metricbeat configuration file to disable the Elasticsearch output by commenting it out and enable the Logstash output by uncommenting the logstash section:

#----------------------------- Logstash output --------------------------------
output.logstash:
  hosts: ["127.0.0.1:5044"]

The hosts option specifies the Logstash server and the port (5044) where Logstash is configured to listen for incoming Beats connections.

For this configuration, you must load the index template into Elasticsearch manually because the options for auto loading the template are only available for the Elasticsearch output.

To test your configuration file, change to the directory where the Metricbeat binary is installed, and run Metricbeat in the foreground with the following options specified: ./metricbeat test config -e. Make sure your config files are in the path expected by Metricbeat (see Directory layout), or use the -c flag to specify the path to the config file.

Accessing metadata fields

edit

Every event sent to Logstash contains the following metadata fields that you can use in Logstash for indexing and filtering:

{
    ...
    "@metadata": { 
      "beat": "metricbeat", 
      "version": "6.1.4" 
      "type": "doc" 
    }
}

Metricbeat uses the @metadata field to send metadata to Logstash. See the Logstash documentation for more about the @metadata field.

The default is metricbeat. To change this value, set the index option in the Metricbeat config file.

The beats current version.

The value of type is currently hardcoded to doc. It was used by previous Logstash configs to set the type of the document in Elasticsearch.

The @metadata.type field, added by the Logstash output, is deprecated, hardcoded to doc, and will be removed in Metricbeat 7.0.

You can access this metadata from within the Logstash config file to set values dynamically based on the contents of the metadata.

For example, the following Logstash configuration file for versions 2.x and 5.x sets Logstash to use the index and document type reported by Beats for indexing events into Elasticsearch:

input {
  beats {
    port => 5044
  }
}

output {
  elasticsearch {
    hosts => ["http://localhost:9200"]
    index => "%{[@metadata][beat]}-%{[@metadata][version]}-%{+YYYY.MM.dd}" 
  }
}

%{[@metadata][beat]} sets the first part of the index name to the value of the beat metadata field, %{[@metadata][version]} sets the second part to the Beat’s version, and %{+YYYY.MM.dd} sets the third part of the name to a date based on the Logstash @timestamp field. For example: metricbeat-6.1.4-2017.03.29.

Events indexed into Elasticsearch with the Logstash configuration shown here will be similar to events directly indexed by Beats into Elasticsearch.

Compatibility

edit

This output works with all compatible versions of Logstash. See "Supported Beats Versions" in the Elastic Support Matrix.

Configuration options

edit

You can specify the following options in the logstash section of the metricbeat.yml config file:

enabled

edit

The enabled config is a boolean setting to enable or disable the output. If set to false, the output is disabled.

The default value is true.

hosts

edit

The list of known Logstash servers to connect to. If load balancing is disabled, but multiple hosts are configured, one host is selected randomly (there is no precedence). If one host becomes unreachable, another one is selected randomly.

All entries in this list can contain a port number. If no port number is given, the value specified for port is used as the default port number.

compression_level

edit

The gzip compression level. Setting this value to 0 disables compression. The compression level must be in the range of 1 (best speed) to 9 (best compression).

Increasing the compression level will reduce the network usage but will increase the cpu usage.

The default value is 3.

worker

edit

The number of workers per configured host publishing events to Logstash. This is best used with load balancing mode enabled. Example: If you have 2 hosts and 3 workers, in total 6 workers are started (3 for each host).

loadbalance

edit

If set to true and multiple Logstash hosts are configured, the output plugin load balances published events onto all Logstash hosts. If set to false, the output plugin sends all events to only one host (determined at random) and will switch to another host if the selected one becomes unresponsive. The default value is false.

ttl

edit

Time to live for a connection to Logstash after which the connection will be re-established. Useful when Logstash hosts represent load balancers. Since the connections to Logstash hosts are sticky operating behind load balancers can lead to uneven load distribution between the instances. Specifying a TTL on the connection allows to achieve equal connection distribution between the instances. Specifying a TTL of 0 will disable this feature.

The default value is 0.

The "ttl" option is not yet supported on an async Logstash client (one with the "pipelining" option set).

output.logstash:
  hosts: ["localhost:5044", "localhost:5045"]
  loadbalance: true
  index: metricbeat

pipelining

edit

Configures number of batches to be sent asynchronously to logstash while waiting for ACK from logstash. Output only becomes blocking once number of pipelining batches have been written. Pipelining is disabled if a values of 0 is configured. The default value is 5.

port

edit

Deprecated in 5.0.0.

The default port to use if the port number is not given in hosts. The default port number is 10200.

proxy_url

edit

The URL of the SOCKS5 proxy to use when connecting to the Logstash servers. The value must be a URL with a scheme of socks5://. The protocol used to communicate to Logstash is not based on HTTP so a web-proxy cannot be used.

If the SOCKS5 proxy server requires client authentication, then a username and password can be embedded in the URL as shown in the example.

When using a proxy, hostnames are resolved on the proxy server instead of on the client. You can change this behavior by setting the proxy_use_local_resolver option.

output.logstash:
  hosts: ["remote-host:5044"]
  proxy_url: socks5://user:password@socks5-proxy:2233

proxy_use_local_resolver

edit

The proxy_use_local_resolver option determines if Logstash hostnames are resolved locally when using a proxy. The default value is false which means that when a proxy is used the name resolution occurs on the proxy server.

index

edit

The index root name to write events to. The default is the Beat name. For example "metricbeat" generates "[metricbeat-]6.1.4-YYYY.MM.DD" indices (for example, "metricbeat-6.1.4-2017.04.26").

ssl

edit

Configuration options for SSL parameters like the root CA for Logstash connections. See Specify SSL settings for more information. To use SSL, you must also configure the Beats input plugin for Logstash to use SSL/TLS.

timeout

edit

The number of seconds to wait for responses from the Logstash server before timing out. The default is 30 (seconds).

max_retries

edit

The number of times to retry publishing an event after a publishing failure. After the specified number of retries, the events are typically dropped. Some Beats, such as Filebeat, ignore the max_retries setting and retry until all events are published.

Set max_retries to a value less than 0 to retry until all events are published.

The default is 3.

bulk_max_size

edit

The maximum number of events to bulk in a single Logstash request. The default is 2048.

If the Beat sends single events, the events are collected into batches. If the Beat publishes a large batch of events (larger than the value specified by bulk_max_size), the batch is split.

Specifying a larger batch size can improve performance by lowering the overhead of sending events. However big batch sizes can also increase processing times, which might result in API errors, killed connections, timed-out publishing requests, and, ultimately, lower throughput.

Setting bulk_max_size to values less than or equal to 0 disables the splitting of batches. When splitting is disabled, the queue decides on the number of events to be contained in a batch.

slow_start

edit

If enabled only a subset of events in a batch of events is transferred per transaction. The number of events to be sent increases up to bulk_max_size if no error is encountered. On error the number of events per transaction is reduced again.

The default is false.

« Configure the Elasticsearch output Configure the Kafka output »