IMPORTANT: No additional bug fixes or documentation updates will be released for this version. For the latest information, see the current release documentation.

« Configure index lifecycle management Filter and enhance the exported data »

› ›

Specify SSL settings

edit

Specify SSL settings

edit

You can specify SSL options when you configure:

outputs that support SSL
the Kibana endpoint

Example output config with SSL enabled:

output.elasticsearch.hosts: ["https://192.168.1.42:9200"]
output.elasticsearch.ssl.certificate_authorities: ["/etc/pki/root/ca.pem"]
output.elasticsearch.ssl.certificate: "/etc/pki/client/cert.pem"
output.elasticsearch.ssl.key: "/etc/pki/client/cert.key"

Also see Secure communication with Logstash.

Example Kibana endpoint config with SSL enabled:

setup.kibana.host: "https://192.0.2.255:5601"
setup.kibana.ssl.enabled: true
setup.kibana.ssl.certificate_authorities: ["/etc/pki/root/ca.pem"]
setup.kibana.ssl.certificate: "/etc/pki/client/cert.pem"
setup.kibana.ssl.key: "/etc/pki/client/cert.key"

Configuration options

edit

You can specify the following options in the ssl section of the packetbeat.yml config file:

`enabled`

edit

The enabled setting can be used to disable the ssl configuration by setting it to false. The default value is true.

SSL settings are disabled if either enabled is set to false or the ssl section is missing.

`certificate_authorities`

edit

The list of root certificates for server verifications. If certificate_authorities is empty or not set, the trusted certificate authorities of the host system are used.

`certificate: "/etc/pki/client/cert.pem"`

edit

The path to the certificate for SSL client authentication. If the certificate is not specified, client authentication is not available. The connection might fail if the server requests client authentication. If the SSL server does not require client authentication, the certificate will be loaded, but not requested or used by the server.

When this option is configured, the key option is also required.

`key: "/etc/pki/client/cert.key"`

edit

The client certificate key used for client authentication. This option is required if certificate is specified.

`key_passphrase`

edit

The passphrase used to decrypt an encrypted key stored in the configured key file.

`supported_protocols`

edit

List of allowed SSL/TLS versions. If SSL/TLS server decides for protocol versions not configured, the connection will be dropped during or after the handshake. The setting is a list of allowed protocol versions: SSLv3, TLSv1 for TLS version 1.0, TLSv1.0, TLSv1.1 and TLSv1.2.

The default value is [TLSv1.1, TLSv1.2].

`verification_mode`

edit

This option controls whether the client verifies server certificates and host names. Valid values are none and full. If verification_mode is set to none, all server host names and certificates are accepted. In this mode, TLS-based connections are susceptible to man-in-the-middle attacks. Use this option for testing only.

The default is full.

`cipher_suites`

edit

The list of cipher suites to use. The first entry has the highest priority. If this option is omitted, the Go crypto library’s default suites are used (recommended).

The following cipher suites are available:

ECDHE-ECDSA-AES-128-CBC-SHA
ECDHE-ECDSA-AES-128-CBC-SHA256 (TLS 1.2 only, disabled by default)
ECDHE-ECDSA-AES-128-GCM-SHA256 (TLS 1.2 only)
ECDHE-ECDSA-AES-256-CBC-SHA
ECDHE-ECDSA-AES-256-GCM-SHA384 (TLS 1.2 only)
ECDHE-ECDSA-CHACHA20-POLY1305 (TLS 1.2 only)
ECDHE-ECDSA-RC4-128-SHA (disabled by default - RC4 not recommended)
ECDHE-RSA-3DES-CBC3-SHA
ECDHE-RSA-AES-128-CBC-SHA
ECDHE-RSA-AES-128-CBC-SHA256 (TLS 1.2 only, disabled by default)
ECDHE-RSA-AES-128-GCM-SHA256 (TLS 1.2 only)
ECDHE-RSA-AES-256-CBC-SHA
ECDHE-RSA-AES-256-GCM-SHA384 (TLS 1.2 only)
ECDHE-RSA-CHACHA20-POLY1205 (TLS 1.2 only)
ECDHE-RSA-RC4-128-SHA (disabled by default- RC4 not recommended)
RSA-3DES-CBC3-SHA
RSA-AES-128-CBC-SHA
RSA-AES-128-CBC-SHA256 (TLS 1.2 only, disabled by default)
RSA-AES-128-GCM-SHA256 (TLS 1.2 only)
RSA-AES-256-CBC-SHA
RSA-AES-256-GCM-SHA384 (TLS 1.2 only)
RSA-RC4-128-SHA (disabled by default - RC4 not recommended)

Here is a list of acronyms used in defining the cipher suites:

3DES: Cipher suites using triple DES
AES-128/256: Cipher suites using AES with 128/256-bit keys.
CBC: Cipher using Cipher Block Chaining as block cipher mode.
ECDHE: Cipher suites using Elliptic Curve Diffie-Hellman (DH) ephemeral key exchange.
ECDSA: Cipher suites using Elliptic Curve Digital Signature Algorithm for authentication.
GCM: Galois/Counter mode is used for symmetric key cryptography.
RC4: Cipher suites using RC4.
RSA: Cipher suites using RSA.
SHA, SHA256, SHA384: Cipher suites using SHA-1, SHA-256 or SHA-384.

`curve_types`

edit

The list of curve types for ECDHE (Elliptic Curve Diffie-Hellman ephemeral key exchange).

The following elliptic curve types are available:

P-256
P-384
P-521
X25519

`renegotiation`

edit

This configures what types of TLS renegotiation are supported. The valid options are never, once, and freely. The default value is never.

never - Disables renegotiation.
once - Allows a remote server to request renegotiation once per connection.
freely - Allows a remote server to repeatedly request renegotiation.

« Configure index lifecycle management Filter and enhance the exported data »