Install Elasticsearch with Debian Package
editInstall Elasticsearch with Debian Package
editThe Debian package for Elasticsearch can be downloaded from our website or from our APT repository. It can be used to install Elasticsearch on any Debian-based system such as Debian and Ubuntu.
This package is free to use under the Elastic license. It contains open source and free commercial features and access to paid commercial features. Start a 30-day trial to try out all of the paid commercial features. See the Subscriptions page for information about Elastic license levels.
The latest stable version of Elasticsearch can be found on the Download Elasticsearch page. Other versions can be found on the Past Releases page.
Elasticsearch includes a bundled version of OpenJDK from the JDK maintainers (GPLv2+CE). To use your own version of Java, see the JVM version requirements
Import the Elasticsearch PGP Key
editWe sign all of our packages with the Elasticsearch Signing Key (PGP key D88E42B4, available from https://pgp.mit.edu) with fingerprint:
4609 5ACC 8548 582C 1A26 99A9 D27D 666C D88E 42B4
Download and install the public signing key:
wget -qO - https://artifacts.elastic.co/GPG-KEY-elasticsearch | sudo apt-key add -
Installing from the APT repository
editYou may need to install the apt-transport-https
package on Debian before proceeding:
sudo apt-get install apt-transport-https
Save the repository definition to /etc/apt/sources.list.d/elastic-7.x.list
:
echo "deb https://artifacts.elastic.co/packages/7.x/apt stable main" | sudo tee -a /etc/apt/sources.list.d/elastic-7.x.list
These instructions do not use add-apt-repository
for several reasons:
-
add-apt-repository
adds entries to the system/etc/apt/sources.list
file rather than a clean per-repository file in/etc/apt/sources.list.d
-
add-apt-repository
is not part of the default install on many distributions and requires a number of non-default dependencies. -
Older versions of
add-apt-repository
always add adeb-src
entry which will cause errors because we do not provide a source package. If you have added thedeb-src
entry, you will see an error like the following until you delete thedeb-src
line:Unable to find expected entry 'main/source/Sources' in Release file (Wrong sources.list entry or malformed file)
You can install the Elasticsearch Debian package with:
sudo apt-get update && sudo apt-get install elasticsearch
If two entries exist for the same Elasticsearch repository, you will see an error like this during apt-get update
:
Duplicate sources.list entry https://artifacts.elastic.co/packages/7.x/apt/ ...`
Examine /etc/apt/sources.list.d/elasticsearch-7.x.list
for the duplicate entry or locate the duplicate entry amongst the files in /etc/apt/sources.list.d/
and the /etc/apt/sources.list
file.
On systemd-based distributions, the installation scripts will attempt to set kernel parameters (e.g.,
vm.max_map_count
); you can skip this by masking the systemd-sysctl.service unit.
An alternative package which contains only features that are available under the Apache 2.0 license is also available. To install it, use the following sources list:
echo "deb https://artifacts.elastic.co/packages/oss-7.x/apt stable main" | sudo tee -a /etc/apt/sources.list.d/elastic-7.x.list
Download and install the Debian package manually
editThe Debian package for Elasticsearch v7.3.2 can be downloaded from the website and installed as follows:
wget https://artifacts.elastic.co/downloads/elasticsearch/elasticsearch-7.3.2-amd64.deb wget https://artifacts.elastic.co/downloads/elasticsearch/elasticsearch-7.3.2-amd64.deb.sha512 shasum -a 512 -c elasticsearch-7.3.2-amd64.deb.sha512 sudo dpkg -i elasticsearch-7.3.2-amd64.deb
Compares the SHA of the downloaded Debian package and the published checksum, which should output
|
Alternatively, you can download the following package, which contains only features that are available under the Apache 2.0 license: https://artifacts.elastic.co/downloads/elasticsearch/elasticsearch-oss-7.3.2-amd64.deb
Enable automatic creation of system indices
editSome commercial features automatically create system indices within Elasticsearch.
By default, Elasticsearch is configured to allow automatic index creation, and no
additional steps are required. However, if you have disabled automatic index
creation in Elasticsearch, you must configure
action.auto_create_index
in elasticsearch.yml
to allow
the commercial features to create the following indices:
action.auto_create_index: .monitoring*,.watches,.triggered_watches,.watcher-history*,.ml*
If you are using Logstash
or Beats then you will most likely
require additional index names in your action.auto_create_index
setting, and
the exact value will depend on your local configuration. If you are unsure of
the correct value for your environment, you may consider setting the value to
*
which will allow automatic creation of all indices.
SysV init
vs systemd
editElasticsearch is not started automatically after installation. How to start
and stop Elasticsearch depends on whether your system uses SysV init
or
systemd
(used by newer distributions). You can tell which is being used by
running this command:
ps -p 1
Running Elasticsearch with SysV init
editUse the update-rc.d
command to configure Elasticsearch to start automatically
when the system boots up:
sudo update-rc.d elasticsearch defaults 95 10
Elasticsearch can be started and stopped using the service
command:
sudo -i service elasticsearch start sudo -i service elasticsearch stop
If Elasticsearch fails to start for any reason, it will print the reason for
failure to STDOUT. Log files can be found in /var/log/elasticsearch/
.
Running Elasticsearch with systemd
editTo configure Elasticsearch to start automatically when the system boots up, run the following commands:
sudo /bin/systemctl daemon-reload sudo /bin/systemctl enable elasticsearch.service
Elasticsearch can be started and stopped as follows:
sudo systemctl start elasticsearch.service sudo systemctl stop elasticsearch.service
These commands provide no feedback as to whether Elasticsearch was started
successfully or not. Instead, this information will be written in the log
files located in /var/log/elasticsearch/
.
By default the Elasticsearch service doesn’t log information in the systemd
journal. To enable journalctl
logging, the --quiet
option must be removed
from the ExecStart
command line in the elasticsearch.service
file.
When systemd
logging is enabled, the logging information are available using
the journalctl
commands:
To tail the journal:
sudo journalctl -f
To list journal entries for the elasticsearch service:
sudo journalctl --unit elasticsearch
To list journal entries for the elasticsearch service starting from a given time:
sudo journalctl --unit elasticsearch --since "2016-10-30 18:17:16"
Check man journalctl
or https://www.freedesktop.org/software/systemd/man/journalctl.html for
more command line options.
Checking that Elasticsearch is running
editYou can test that your Elasticsearch node is running by sending an HTTP
request to port 9200
on localhost
:
GET /
which should give you a response something like this:
{ "name" : "Cp8oag6", "cluster_name" : "elasticsearch", "cluster_uuid" : "AT69_T_DTp-1qgIJlatQqA", "version" : { "number" : "7.3.2", "build_flavor" : "default", "build_type" : "tar", "build_hash" : "f27399d", "build_date" : "2016-03-30T09:51:41.449Z", "build_snapshot" : false, "lucene_version" : "8.1.0", "minimum_wire_compatibility_version" : "1.2.3", "minimum_index_compatibility_version" : "1.2.3" }, "tagline" : "You Know, for Search" }
Configuring Elasticsearch
editElasticsearch defaults to using /etc/elasticsearch
for runtime configuration.
The ownership of this directory and all files in this directory are set to
root:elasticsearch
on package installation and the directory has the setgid
flag set so that any files and subdirectories created under /etc/elasticsearch
are created with this ownership as well (e.g., if a keystore is created using
the keystore tool). It is expected that this be maintained so
that the Elasticsearch process can read the files under this directory via the
group permissions.
Elasticsearch loads its configuration from the
/etc/elasticsearch/elasticsearch.yml
file by default. The format of this
config file is explained in Configuring Elasticsearch.
The Debian package also has a system configuration file (/etc/default/elasticsearch
),
which allows you to set the following parameters:
|
Set a custom Java path to be used. |
|
Maximum number of open files, defaults to |
|
Maximum locked memory size. Set to |
|
Maximum number of memory map areas a process may have. If you use |
|
Configuration file directory (which needs to include |
|
Any additional JVM system properties you may want to apply. |
|
Configure restart on package upgrade, defaults to |
Distributions that use systemd
require that system resource limits be
configured via systemd
rather than via the /etc/sysconfig/elasticsearch
file. See Systemd configuration for more information.
Directory layout of Debian package
editThe Debian package places config files, logs, and the data directory in the appropriate locations for a Debian-based system:
Type | Description | Default Location | Setting |
---|---|---|---|
home |
Elasticsearch home directory or |
|
|
bin |
Binary scripts including |
|
|
conf |
Configuration files including |
|
|
conf |
Environment variables including heap size, file descriptors. |
|
|
data |
The location of the data files of each index / shard allocated on the node. Can hold multiple locations. |
|
|
jdk |
The bundled Java Development Kit used to run Elasticsearch. Can
be overriden by setting the |
|
|
logs |
Log files location. |
|
|
plugins |
Plugin files location. Each plugin will be contained in a subdirectory. |
|
|
repo |
Shared file system repository locations. Can hold multiple locations. A file system repository can be placed in to any subdirectory of any directory specified here. |
Not configured |
|
Next steps
editYou now have a test Elasticsearch environment set up. Before you start serious development or go into production with Elasticsearch, you must do some additional setup:
- Learn how to configure Elasticsearch.
- Configure important Elasticsearch settings.
- Configure important system settings.