cloudwatch

edit

This output lets you aggregate and send metric data to AWS CloudWatch

Summary

edit

This plugin is intended to be used on a logstash indexer agent (but that is not the only way, see below.) In the intended scenario, one cloudwatch output plugin is configured, on the logstash indexer node, with just AWS API credentials, and possibly a region and/or a namespace. The output looks for fields present in events, and when it finds them, it uses them to calculate aggregate statistics. If the metricname option is set in this output, then any events which pass through it will be aggregated & sent to CloudWatch, but that is not recommended. The intended use is to NOT set the metricname option here, and instead to add a CW_metricname field (and other fields) to only the events you want sent to CloudWatch.

When events pass through this output they are queued for background aggregation and sending, which happens every minute by default. The queue has a maximum size, and when it is full aggregated statistics will be sent to CloudWatch ahead of schedule. Whenever this happens a warning message is written to logstash’s log. If you see this you should increase the queue_size configuration option to avoid the extra API calls. The queue is emptied every time we send data to CloudWatch.

Note: when logstash is stopped the queue is destroyed before it can be processed. This is a known limitation of logstash and will hopefully be addressed in a future version.

Details

edit

There are two ways to configure this plugin, and they can be used in combination: event fields & per-output defaults

Event Field configuration

edit

You add fields to your events in inputs & filters and this output reads those fields to aggregate events. The names of the fields read are configurable via the field_* options.

Per-output defaults

edit

You set universal defaults in this output plugin’s configuration, and if an event does not have a field for that option then the default is used.

Notice, the event fields take precedence over the per-output defaults.

At a minimum events must have a "metric name" to be sent to CloudWatch. This can be achieved either by providing a default here OR by adding a CW_metricname field. By default, if no other configuration is provided besides a metric name, then events will be counted (Unit: Count, Value: 1) by their metric name (either a default or from their CW_metricname field)

Other fields which can be added to events to modify the behavior of this plugin are, CW_namespace, CW_unit, CW_value, and CW_dimensions. All of these field names are configurable in this output. You can also set per-output defaults for any of them. See below for details.

Read more about AWS CloudWatch, and the specific of API endpoint this output uses, PutMetricData

 

Synopsis

edit

This plugin supports the following configuration options:

Required configuration options:

cloudwatch {
}

Available configuration options:

Setting Input type Required Default value

access_key_id

string

No

aws_credentials_file

string

No

codec

codec

No

"plain"

dimensions

hash

No

field_dimensions

string

No

"CW_dimensions"

field_metricname

string

No

"CW_metricname"

field_namespace

string

No

"CW_namespace"

field_unit

string

No

"CW_unit"

field_value

string

No

"CW_value"

metricname

string

No

namespace

string

No

"Logstash"

proxy_uri

string

No

queue_size

number

No

10000

region

string, one of ["us-east-1", "us-west-1", "us-west-2", "eu-central-1", "eu-west-1", "ap-southeast-1", "ap-southeast-2", "ap-northeast-1", "sa-east-1", "us-gov-west-1", "cn-north-1"]

No

"us-east-1"

secret_access_key

string

No

session_token

string

No

timeframe

string

No

"1m"

unit

string, one of ["Seconds", "Microseconds", "Milliseconds", "Bytes", "Kilobytes", "Megabytes", "Gigabytes", "Terabytes", "Bits", "Kilobits", "Megabits", "Gigabits", "Terabits", "Percent", "Count", "Bytes/Second", "Kilobytes/Second", "Megabytes/Second", "Gigabytes/Second", "Terabytes/Second", "Bits/Second", "Kilobits/Second", "Megabits/Second", "Gigabits/Second", "Terabits/Second", "Count/Second", "None"]

No

"Count"

use_ssl

boolean

No

true

value

string

No

"1"

workers

number

No

1

Details

edit

 

access_key_id

edit
  • Value type is string
  • There is no default value for this setting.

aws_credentials_file

edit
  • Value type is string
  • There is no default value for this setting.

codec

edit
  • Value type is codec
  • Default value is "plain"

The codec used for output data. Output codecs are a convenient method for encoding your data before it leaves the output, without needing a separate filter in your Logstash pipeline.

dimensions

edit
  • Value type is hash
  • There is no default value for this setting.

The default dimensions [ name, value, …​ ] to use for events which do not have a CW_dimensions field

exclude_tags (DEPRECATED)

edit
  • DEPRECATED WARNING: This configuration item is deprecated and may not be available in future versions.
  • Value type is array
  • Default value is []

Only handle events without any of these tags. Optional.

field_dimensions

edit
  • Value type is string
  • Default value is "CW_dimensions"

The name of the field used to set the dimensions on an event metric The field named here, if present in an event, must have an array of one or more key & value pairs, for example…​ add_field => [ "CW_dimensions", "Environment", "CW_dimensions", "prod" ] or, equivalently…​ add_field => [ "CW_dimensions", "Environment" ] add_field => [ "CW_dimensions", "prod" ]

field_metricname

edit
  • Value type is string
  • Default value is "CW_metricname"

The name of the field used to set the metric name on an event The author of this plugin recommends adding this field to events in inputs & filters rather than using the per-output default setting so that one output plugin on your logstash indexer can serve all events (which of course had fields set on your logstash shippers.)

field_namespace

edit
  • Value type is string
  • Default value is "CW_namespace"

The name of the field used to set a different namespace per event Note: Only one namespace can be sent to CloudWatch per API call so setting different namespaces will increase the number of API calls and those cost money.

field_unit

edit
  • Value type is string
  • Default value is "CW_unit"

The name of the field used to set the unit on an event metric

field_value

edit
  • Value type is string
  • Default value is "CW_value"

The name of the field used to set the value (float) on an event metric

metricname

edit
  • Value type is string
  • There is no default value for this setting.

The default metric name to use for events which do not have a CW_metricname field. Beware: If this is provided then all events which pass through this output will be aggregated and sent to CloudWatch, so use this carefully. Furthermore, when providing this option, you will probably want to also restrict events from passing through this output using event type, tag, and field matching

namespace

edit
  • Value type is string
  • Default value is "Logstash"

The default namespace to use for events which do not have a CW_namespace field

proxy_uri

edit
  • Value type is string
  • There is no default value for this setting.

queue_size

edit
  • Value type is number
  • Default value is 10000

How many events to queue before forcing a call to the CloudWatch API ahead of timeframe schedule Set this to the number of events-per-timeframe you will be sending to CloudWatch to avoid extra API calls

region

edit
  • Value can be any of: us-east-1, us-west-1, us-west-2, eu-central-1, eu-west-1, ap-southeast-1, ap-southeast-2, ap-northeast-1, sa-east-1, us-gov-west-1, cn-north-1
  • Default value is "us-east-1"

secret_access_key

edit
  • Value type is string
  • There is no default value for this setting.

session_token

edit
  • Value type is string
  • There is no default value for this setting.

tags (DEPRECATED)

edit
  • DEPRECATED WARNING: This configuration item is deprecated and may not be available in future versions.
  • Value type is array
  • Default value is []

Only handle events with all of these tags. Optional.

timeframe

edit
  • Value type is string
  • Default value is "1m"

Constants aggregate_key members Units How often to send data to CloudWatch This does not affect the event timestamps, events will always have their actual timestamp (to-the-minute) sent to CloudWatch.

We only call the API if there is data to send.

See the Rufus Scheduler docs for an explanation of allowed values

type (DEPRECATED)

edit
  • DEPRECATED WARNING: This configuration item is deprecated and may not be available in future versions.
  • Value type is string
  • Default value is ""

The type to act on. If a type is given, then this output will only act on messages with the same type. See any input plugin’s type attribute for more. Optional.

unit

edit
  • Value can be any of: Seconds, Microseconds, Milliseconds, Bytes, Kilobytes, Megabytes, Gigabytes, Terabytes, Bits, Kilobits, Megabits, Gigabits, Terabits, Percent, Count, Bytes/Second, Kilobytes/Second, Megabytes/Second, Gigabytes/Second, Terabytes/Second, Bits/Second, Kilobits/Second, Megabits/Second, Gigabits/Second, Terabits/Second, Count/Second, None
  • Default value is "Count"

The default unit to use for events which do not have a CW_unit field If you set this option you should probably set the "value" option along with it

use_ssl

edit
  • Value type is boolean
  • Default value is true

value

edit
  • Value type is string
  • Default value is "1"

The default value to use for events which do not have a CW_value field If provided, this must be a string which can be converted to a float, for example…​ "1", "2.34", ".5", and "0.67" If you set this option you should probably set the unit option along with it

workers

edit
  • Value type is number
  • Default value is 1

The number of workers to use for this output. Note that this setting may not be useful for all outputs.