Machine learning anomaly detection limitations

The following limitations and known problems apply to the 8.15.5 release of the Elastic machine learning features. The limitations are grouped into four categories:

Machine learning uses Streaming SIMD Extensions (SSE) 4.2 instructions, so it works only on machines whose CPUs support SSE4.2. If you run Elasticsearch on older hardware you must disable machine learning by setting xpack.ml.enabled to false. See Machine learning settings in Elasticsearch.

When there are many machine learning jobs running at the same time and there are insufficient CPU resources, the JVM performance must be prioritized so search and indexing latency remain acceptable. To that end, when CPU is constrained on Linux and MacOS environments, the CPU scheduling priority of native analysis processes is reduced to favor the Elasticsearch JVM. This improvement does not apply to Windows environments.

You must have an appropriate license to initiate Machine learning jobs on datasets from remote clusters accessed through Cross-Cluster Search (CCS). Refer to the [Subscriptions](https://www.elastic.co/subscriptions) page for details on features available with different subscription levels.

By default, the terms aggregation returns the buckets for the top ten terms. You can change this default behavior by setting the size parameter.

If you send pre-aggregated data to a job for analysis, you must ensure that the size is configured correctly. Otherwise, some data might not be analyzed.

Using scripted metric aggregations in datafeeds is not supported. Refer to the Aggregating data for faster performance page to learn more about aggregations in datafeeds.

You cannot use the following field names in the by_field_name or over_field_name properties in a job: by; count; over. This limitation also applies to those properties when you create advanced jobs in Kibana.

If an anomaly detection job is configured to analyze an aggregatable field (a field that is part of the index mapping definition), and this field contains an array, then the array is turned into a comma-separated concatenated string. The items in the array are sorted alphabetically and the duplicated items are removed. For example, the array ["zebra", "dog", "cat", "alligator", "cat"] becomes alligator,cat,dog,zebra. The Anomaly Explorer charts don’t display any results for the job as the string does not exist in the source data. The Single Metric Viewer displays results if the model plot is enabled.

If an array field is not aggregatable and is retrieved from _source, the array is also turned into a comma-separated, concatenated list. However, the list items are not sorted alphabetically, nor are they deduplicated. Taking the example above, the comma-separated list, in this case, would be zebra,dog,cat,alligator,cat.

Analyzing large arrays results in long strings which may require more system resources. Consider using a query in the datafeed that filters on the relevant items of the array.

You cannot create anomaly detection jobs on frozen tier data through the job wizards in Kibana. If you want to create such jobs, use the APIs instead.

There are some limitations that affect your ability to create a forecast:

Anomaly detection jobs sort all data by a user-defined time field, which is frequently accessed. If the time field is a runtime field, the performance impact of calculating field values at query time can significantly slow the job. Use an indexed field as a time field when running anomaly detection jobs.

If a datafeed contains Painless scripts that use deprecated syntax, deprecation warnings are displayed when the datafeed is previewed or started. However, it is not possible to check for deprecation warnings across all datafeeds as a bulk action because running the required queries might be a resource intensive process. Therefore any deprecation warnings due to deprecated Painless syntax are not available in the Upgrade assistant.

Categorization identifies static parts of unstructured logs and groups similar messages together. The default categorization tokenizer assumes English language log messages. For other languages you must define a different categorization_analyzer for your job.

Additionally, a dictionary used to influence the categorization process contains only English words. This means categorization might work better in English than in other languages. The ability to customize the dictionary will be added in a future release.

One of the counts associated with a machine learning job is missing_field_count, which indicates the number of records that are missing a configured field.

Since jobs analyze JSON data, the missing_field_count might be misleading. Missing fields might be expected due to the structure of the data and therefore do not generate poor results.

For more information about missing_field_count, see the get anomaly detection job statistics API.

When the Elasticsearch security features are enabled, a datafeed stores the roles of the user who created or updated the datafeed at that time. This means that if the roles the user has are changed after they create or update a datafeed then the datafeed continues to run without change. However, if instead the permissions associated with the roles that are stored with the datafeed are changed then this affects the datafeed. For more information, see Datafeeds.

In 6.6 and later releases, the get jobs API and the get job statistics API return a maximum of 10,000 jobs. Likewise, the get datafeeds API and the get datafeed statistics API return a maximum of 10,000 datafeeds.

There are some factors that may be considered when you run forecasts:

The machine learning features in Kibana use pop-ups. You must configure your web browser so that it does not block pop-up windows or create an exception for your Kibana URL.

In Kibana, Anomaly Explorer and Single Metric Viewer charts are not displayed:

Refer to the table below for a more detailed view of supported detector functions.

The charts can also look odd in circumstances where there is very little data to plot. For example, if there is only one data point, it is represented as a single dot. If there are only two data points, they are joined by a line. The following table shows which detector functions are supported in the Single Metric Viewer.

If you create jobs in Kibana, you must use datafeeds. If the data that you want to analyze is not stored in Elasticsearch, you cannot use datafeeds and therefore you cannot create your jobs in Kibana. You can, however, use the machine learning APIs to create jobs. For more information, see Datafeeds and API quick reference.

If you create single or multi-metric jobs in Kibana, it might enable some options under the covers that you’d want to reconsider for large or long-running jobs.

For example, when you create a single metric job in Kibana, it generally enables the model_plot_config advanced configuration option. That configuration option causes model information to be stored along with the results and provides a more detailed view into anomaly detection. It is specifically used by the Single Metric Viewer in Kibana. When this option is enabled, however, it can add considerable overhead to the performance of the system. If you have jobs with many entities, for example data from tens of thousands of servers, storing this additional model information for every bucket might be problematic. If you are not certain that you need this option or if you experience performance issues, edit your job configuration to disable this option.

Likewise, when you create a single or multi-metric job in Kibana, in some cases it uses aggregations on the data that it retrieves from Elasticsearch. One of the benefits of summarizing data this way is that Elasticsearch automatically distributes these calculations across your cluster. This summarized data is then fed into machine learning instead of raw results, which reduces the volume of data that must be considered while detecting anomalies. However, if you have two jobs, one of which uses pre-aggregated data and another that does not, their results might differ. This difference is due to the difference in precision of the input data. The machine learning analytics are designed to be aggregation-aware and the likely increase in performance that is gained by pre-aggregating the data makes the potentially poorer precision worthwhile. If you want to view or change the aggregations that are used in your job, refer to the aggregations property in your datafeed.

When the aggregation interval of the datafeed and the bucket span of the job don’t match, the values of the chart plotted in both the Single Metric Viewer and the Anomaly Explorer differ from the actual values of the job. To avoid this behavior, make sure that the aggregation interval in the datafeed configuration and the bucket span in the anomaly detection job configuration have the same values.

Spaces enable you to organize your anomaly detection jobs in Kibana and to see only the jobs and other saved objects that belong to your space. However, this limited scope does not apply to calendars and filters; they are visible in all spaces.

Rollup indices and data views with rolled up indices cannot be used in anomaly detection jobs or datafeeds in Kibana. If you try to analyze data that exists in an index that uses the experimental data rollup features, the anomaly detection job creation wizards fail. If you use APIs to create anomaly detection jobs that use data rollup features, the job results might not display properly in the Single Metric Viewer or Anomaly Explorer in Kibana.