SSL input settings

edit

SSL input settings

edit

You can specify the following options in the apm-server.ssl section of the apm-server.yml config file. They apply to SSL/TLS communication between the APM Server and APM Agents.

`enabled`

edit

The enabled setting can be used to enable the ssl configuration by setting it to true. The default value is false.

`certificate`

edit

The path to the file containing the certificate for Server authentication. Required if apm-server.ssl.enabled is true.

`key`

edit

The path to the file containing the Server certificate key. Required if apm-server.ssl.enabled is true.

`key_passphrase`

edit

The passphrase used to decrypt an encrypted key stored in the configured key file. We recommend saving the key_passphrase in the APM Server Secrets keystore.

`supported_protocols`

edit

This setting is a list of allowed protocol versions: SSLv3, TLSv1.0, TLSv1.1, TLSv1.2 and TLSv1.3. We do not recommend using SSLv3 or TLSv1.0. The default value is [TLSv1.1, TLSv1.2, TLSv1.3].

`cipher_suites`

edit

The list of cipher suites to use. The first entry has the highest priority. If this option is omitted, the Go crypto library’s default suites are used (recommended). Note that TLS 1.3 cipher suites are not individually configurable in Go, so they are not included in this list.

The following cipher suites are available:

Cypher	Notes
ECDHE-ECDSA-AES-128-CBC-SHA
ECDHE-ECDSA-AES-128-CBC-SHA256	TLS 1.2 only. Disabled by default.
ECDHE-ECDSA-AES-128-GCM-SHA256	TLS 1.2 only.
ECDHE-ECDSA-AES-256-CBC-SHA
ECDHE-ECDSA-AES-256-GCM-SHA384	TLS 1.2 only.
ECDHE-ECDSA-CHACHA20-POLY1305	TLS 1.2 only.
ECDHE-ECDSA-RC4-128-SHA	Disabled by default. RC4 not recommended.
ECDHE-RSA-3DES-CBC3-SHA
ECDHE-RSA-AES-128-CBC-SHA
ECDHE-RSA-AES-128-CBC-SHA256	TLS 1.2 only. Disabled by default.
ECDHE-RSA-AES-128-GCM-SHA256	TLS 1.2 only.
ECDHE-RSA-AES-256-CBC-SHA
ECDHE-RSA-AES-256-GCM-SHA384	TLS 1.2 only.
ECDHE-RSA-CHACHA20-POLY1205	TLS 1.2 only.
ECDHE-RSA-RC4-128-SHA	Disabled by default. RC4 not recommended.
RSA-3DES-CBC3-SHA
RSA-AES-128-CBC-SHA
RSA-AES-128-CBC-SHA256	TLS 1.2 only. Disabled by default.
RSA-AES-128-GCM-SHA256	TLS 1.2 only.
RSA-AES-256-CBC-SHA
RSA-AES-256-GCM-SHA384	TLS 1.2 only.
RSA-RC4-128-SHA	Disabled by default. RC4 not recommended.

Here is a list of acronyms used in defining the cipher suites:

3DES: Cipher suites using triple DES
AES-128/256: Cipher suites using AES with 128/256-bit keys.
CBC: Cipher using Cipher Block Chaining as block cipher mode.
ECDHE: Cipher suites using Elliptic Curve Diffie-Hellman (DH) ephemeral key exchange.
ECDSA: Cipher suites using Elliptic Curve Digital Signature Algorithm for authentication.
GCM: Galois/Counter mode is used for symmetric key cryptography.
RC4: Cipher suites using RC4.
RSA: Cipher suites using RSA.
SHA, SHA256, SHA384: Cipher suites using SHA-1, SHA-256 or SHA-384.

`curve_types`

edit

The list of curve types for ECDHE (Elliptic Curve Diffie-Hellman ephemeral key exchange).

`certificate_authorities`

edit

The list of root certificates for verifying client certificates. If certificate_authorities is empty or not set, the trusted certificate authorities of the host system are used. If certificate_authorities is set, client_authentication will be automatically set to required. Sending client certificates is currently only supported by the RUM agent through the browser and by the Jaeger agent.

`client_authentication`

edit

This configures what types of client authentication are supported. The valid options are none, optional, and required. The default is none. If certificate_authorities has been specified, this setting will automatically change to required. This option only needs to be configured when the agent is expected to provide a client certificate. Sending client certificates is currently only supported by the RUM agent through the browser and by the Jaeger agent.

none - Disables client authentication.
optional - When a client certificate is given, the server will verify it.
required - Requires clients to provide a valid certificate.

« SSL output settings Configure transaction metrics »