APM Server command referenceedit
APM Server provides a command-line interface for starting APM Server and performing common tasks, like testing configuration files.
The command-line also supports global flags for controlling global behaviors.
Use sudo
to run the following commands if:
-
the config file is owned by
root
, or -
APM Server is configured to capture data that requires
root
access
Some of the features described here require an Elastic license. For more information, see https://www.elastic.co/subscriptions and License Management.
Commands | |
---|---|
Exports the configuration, index template, or ILM policy to stdout. |
|
Shows help for any command. |
|
Manages the secrets keystore. |
|
Runs APM Server. This command is used by default if you start APM Server without specifying a command. |
|
Sets up the initial environment, including the ES index template, and ILM policy and write alias. |
|
Tests the configuration. |
|
Shows information about the current version. |
Also see Global flags.
export
commandedit
Exports the configuration, index template, or ILM policy to stdout. You can use this command to quickly view your configuration or see the contents of the index template or the ILM policy.
SYNOPSIS
apm-server export SUBCOMMAND [FLAGS]
SUBCOMMANDS
-
config
-
Exports the current configuration to stdout. If you use the
-c
flag, this command exports the configuration that’s defined in the specified file. -
template
-
Exports the index template to stdout. You can specify the
--es.version
and--index
flags to further define what gets exported. Furthermore you can export the template to a file instead ofstdout
by defining a directory via--dir
.
-
ilm-policy
-
Exports the index lifecycle management policy to stdout. You can specify the
--es.version
and a--dir
to which the policy should be exported as a file rather than exporting tostdout
.
FLAGS
-
--es.version VERSION
-
When used with
template
, exports an index template that is compatible with the specified version. When used withilm-policy
, exports the ILM policy if the specified ES version is enabled for ILM. -
-h, --help
-
Shows help for the
export
command. -
--index BASE_NAME
-
When used with
template
, sets the base name to use for the index template. If this flag is not specified, the default base name isapm-server
. -
--dir DIRNAME
-
Define a directory to which the template and ILM policy should be exported to
as files instead of printing them to
stdout
.
Also see Global flags.
EXAMPLES
apm-server export config apm-server export template --es.version 7.5.2 --index myindexname
help
commandedit
Shows help for any command.
If no command is specified, shows help for the run
command.
SYNOPSIS
apm-server help COMMAND_NAME [FLAGS]
-
COMMAND_NAME
- Specifies the name of the command to show help for.
FLAGS
-
-h, --help
-
Shows help for the
help
command.
Also see Global flags.
EXAMPLE
apm-server help export
keystore
commandedit
Manages the secrets keystore.
SYNOPSIS
apm-server keystore SUBCOMMAND [FLAGS]
SUBCOMMANDS
-
add KEY
-
Adds the specified key to the keystore. Use the
--force
flag to overwrite an existing key. Use the--stdin
flag to pass the value throughstdin
. -
create
-
Creates a keystore to hold secrets. Use the
--force
flag to overwrite the existing keystore. -
list
- Lists the keys in the keystore.
-
remove KEY
- Removes the specified key from the keystore.
FLAGS
-
--force
-
Valid with the
add
andcreate
subcommands. When used withadd
, overwrites the specified key. When used withcreate
, overwrites the keystore. -
--stdin
-
When used with
add
, uses the stdin as the source of the key’s value. -
-h, --help
-
Shows help for the
keystore
command.
Also see Global flags.
EXAMPLES
apm-server keystore create apm-server keystore add ES_PWD apm-server keystore remove ES_PWD apm-server keystore list
See Secrets keystore for more examples.
run
commandedit
Runs APM Server. This command is used by default if you start APM Server without specifying a command.
SYNOPSIS
apm-server run [FLAGS]
Or:
apm-server [FLAGS]
FLAGS
-
-N, --N
- Disables publishing for testing purposes. This option disables all outputs except the File output.
-
--cpuprofile FILE
- Writes CPU profile data to the specified file. This option is useful for troubleshooting APM Server.
-
-h, --help
-
Shows help for the
run
command. -
--httpprof [HOST]:PORT
- Starts an http server for profiling. This option is useful for troubleshooting and profiling APM Server.
-
--memprofile FILE
- Writes memory profile data to the specified output file. This option is useful for troubleshooting APM Server.
Also see Global flags.
EXAMPLE
apm-server run -e
Or:
apm-server -e
setup
commandedit
Sets up the initial environment, including the ES index template, and ILM policy and write alias
- The index template ensures that fields are mapped correctly in Elasticsearch. If index lifecycle management is enabled it also ensures that the defined ILM policy and write alias are connected to the indices matching the index template. The ILM policy takes care of the lifecycle of an index, when to do a rollover, when to move an index from the hot phase to the next phase, etc.
This command sets up the environment without actually running APM Server and ingesting data.
SYNOPSIS
apm-server setup [FLAGS]
FLAGS
-
-h, --help
-
Shows help for the
setup
command. -
--index-management
- Sets up components related to Elasticsearch index management including template, ILM policy, and write alias (if supported and configured).
-
--pipelines
-
Registers the pipeline definitions set in
ingest/pipeline/definition.json
. -
--template
-
[7.2]
Deprecated in 7.2.
Sets up the index template only.
It is recommended to use
--index-management
instead. -
--ilm-policy
-
[7.2]
Deprecated in 7.2.
Sets up the index lifecycle management policy.
It is recommended to use
--index-management
instead.
Also see Global flags.
EXAMPLES
apm-server setup --index-management apm-server setup --pipelines
test
commandedit
Tests the configuration.
SYNOPSIS
apm-server test SUBCOMMAND [FLAGS]
SUBCOMMANDS
-
config
- Tests the configuration settings.
-
output
- Tests that APM Server can connect to the output by using the current settings.
FLAGS
-
-h, --help
-
Shows help for the
test
command.
Also see Global flags.
EXAMPLE
apm-server test config
version
commandedit
Shows information about the current version.
SYNOPSIS
apm-server version [FLAGS]
FLAGS
-
-h, --help
-
Shows help for the
version
command.
Also see Global flags.
EXAMPLE
apm-server version
Global flagsedit
These global flags are available whenever you run APM Server.
-
-E, --E "SETTING_NAME=VALUE"
-
Overrides a specific configuration setting. You can specify multiple overrides. For example:
apm-server -E "name=mybeat" -E "output.elasticsearch.hosts=['http://myhost:9200']"
This setting is applied to the currently running APM Server process. The APM Server configuration file is not changed.
-
-c, --c FILE
-
Specifies the configuration file to use for APM Server. The file you specify
here is relative to
path.config
. If the-c
flag is not specified, the default config file,apm-server.yml
, is used. -
-d, --d SELECTORS
-
Enables debugging for the specified selectors. For the selectors, you can
specify a comma-separated
list of components, or you can use
-d "*"
to enable debugging for all components. For example,-d "publish"
displays all the "publish" related messages. -
-e, --e
- Logs to stderr and disables syslog/file output.
-
--path.config
- Sets the path for configuration files. See the Directory layout section for details.
-
--path.data
- Sets the path for data files. See the Directory layout section for details.
-
--path.home
- Sets the path for miscellaneous files. See the Directory layout section for details.
-
--path.logs
- Sets the path for log files. See the Directory layout section for details.
-
--strict.perms
-
Sets strict permission checking on configuration files. The default is
-strict.perms=true
. See Configuration file ownership for more information. -
-v, --v
- Logs INFO-level messages.