IMPORTANT: No additional bug fixes or documentation updates will be released for this version. For the latest information, see the current release documentation.

« Configure the Elasticsearch output Configure SSL/TLS for standalone Elastic Agents »

› › ›

Logstash output

edit

Logstash output

edit

The Logstash output uses an internal protocol to send events directly to Logstash over TCP. Logstash provides additional parsing, transformation, and routing of data collected by Elastic Agent.

Compatibility: This output works with all compatible versions of Logstash. Refer to the Elastic Support Matrix.

This example configures a Logstash output called default in the elastic-agent.yml file:

outputs:
  default:
    type: logstash
    hosts: ["127.0.0.1:5044"]

The Logstash server and the port (5044) where Logstash is configured to listen for incoming Elastic Agent connections.

To receive the events in Logstash, you also need to create a Logstash configuration pipeline. The Logstash configuration pipeline listens for incoming Elastic Agent connections, processes received events, and then sends the events to Elasticsearch.

The following example configures a Logstash pipeline that listens on port 5044 for incoming Elastic Agent connections and routes received events to Elasticsearch:

input {
  elastic_agent {
    port => 5044
    enrich => none # don't modify the events' schema at all
    # or minimal change, add only ssl and source metadata
    # enrich => [ssl_peer_metadata, source_metadata]
  }
}

output {
  elasticsearch {
    hosts => ["http://localhost:9200"] 
    data_stream => "true"
  }
}

The Elasticsearch server and the port (9200) where Elasticsearch is running.

For more information about configuring Logstash, refer to Configuring Logstash and Elastic Agent input plugin.

Logstash output configuration settings

edit

The logstash output supports the following settings, grouped by category. Many of these settings have sensible defaults that allow you to run Elastic Agent with minimal configuration.

Commonly used settings

edit

Setting	Description
`enabled`	(boolean) Enables or disables the output. If set to `false`, the output is disabled.
`escape_html`	(boolean) Configures escaping of HTML in strings. Set to `true` to enable escaping. Default: `false`
`hosts`	(list) The list of known Logstash servers to connect to. If load balancing is disabled, but multiple hosts are configured, one host is selected randomly (there is no precedence). If one host becomes unreachable, another one is selected randomly. All entries in this list can contain a port number. If no port is specified, `5044` is used.
`proxy_url`	(string) The URL of the SOCKS5 proxy to use when connecting to the Logstash servers. The value must be a URL with a scheme of `socks5://`. The protocol used to communicate to Logstash is not based on HTTP, so you cannot use a web proxy. If the SOCKS5 proxy server requires client authentication, embed a username and password in the URL as shown in the example. When using a proxy, hostnames are resolved on the proxy server instead of on the client. To change this behavior, set `proxy_use_local_resolver`. outputs: default: type: logstash hosts: ["remote-host:5044"] proxy_url: socks5://user:password@socks5-proxy:2233
`proxy_use_` `local_resolver`	(boolean) Determines whether Logstash hostnames are resolved locally when using a proxy. If `false` and a proxy is used, name resolution occurs on the proxy server. Default: `false`

Authentication settings

edit

When sending data to a secured cluster through the logstash output, Elastic Agent can use SSL/TLS. For a list of available settings, refer to SSL/TLS, specifically the settings under Table 1, “Common configuration options” and Table 2, “Client configuration options”.

To use SSL/TLS, you must also configure the Elastic Agent input plugin for Logstash to use SSL/TLS.

For more information, refer to Configure SSL/TLS for the Logstash output.

Performance tuning settings

edit

Settings that may affect performance.

Setting	Description
`backoff.init`	(string) The number of seconds to wait before trying to reconnect to Logstash after a network error. After waiting `backoff.init` seconds, Elastic Agent tries to reconnect. If the attempt fails, the backoff timer is increased exponentially up to `backoff.max`. After a successful connection, the backoff timer is reset. Default: `1s`
`backoff.max`	(string) The maximum number of seconds to wait before attempting to connect to Elasticsearch after a network error. Default: `60s`
`bulk_max_size`	(int) The maximum number of events to bulk in a single Logstash request. Events can be collected into batches. Elastic Agent will split batches larger than `bulk_max_size` into multiple batches. Specifying a larger batch size can improve performance by lowering the overhead of sending events. However big batch sizes can also increase processing times, which might result in API errors, killed connections, timed-out publishing requests, and, ultimately, lower throughput. Set this value to `0` to turn off the splitting of batches. When splitting is turned off, the queue determines the number of events to be contained in a batch. Default: `2048`
`compression_level`	(int) The gzip compression level. Set this value to `0` to disable compression. The compression level must be in the range of `1` (best speed) to `9` (best compression). Increasing the compression level reduces network usage but increases CPU usage. Default: `3`
`loadbalance`	If `true` and multiple Logstash hosts are configured, the output plugin load balances published events onto all Logstash hosts. If `false`, the output plugin sends all events to one host (determined at random) and switches to another host if the selected one becomes unresponsive. Default: `false` Example: outputs: default: type: logstash hosts: ["localhost:5044", "localhost:5045"] loadbalance: true
`max_retries`	(int) The number of times to retry publishing an event after a publishing failure. After the specified number of retries, the events are typically dropped. Set `max_retries` to a value less than 0 to retry until all events are published. Default: `3`
`pipelining`	(int) The number of batches to send asynchronously to Logstash while waiting for an ACK from Logstash. The output becomes blocking after the specified number of batches are written. Specify `0` to turn off pipelining. Default: `2`
`slow_start`	(boolean) If `true`, only a subset of events in a batch of events is transferred per transaction. The number of events to be sent increases up to `bulk_max_size` if no error is encountered. On error, the number of events per transaction is reduced again. Default: `false`
`timeout`	(string) The number of seconds to wait for responses from the Logstash server before timing out. Default: `30s`
`ttl`	(string) Time to live for a connection to Logstash after which the connection will be reestablished. This setting is useful when Logstash hosts represent load balancers. Because connections to Logstash hosts are sticky, operating behind load balancers can lead to uneven load distribution across instances. Specify a TTL on the connection to achieve equal connection distribution across instances. Default: `0` (turns off the feature) The `ttl` option is not yet supported on an asynchronous Logstash client (one with the `pipelining` option set).
`worker`	(int) The number of workers per configured host publishing events. This is best used with load balancing mode enabled. Example: If you have two hosts and three workers, in total six workers are started (three for each host). Default: `1`

« Configure the Elasticsearch output Configure SSL/TLS for standalone Elastic Agents »