Setting Up SSL/TLS on a Cluster

edit

Shield enables you to encrypt traffic to and from nodes in your Elasticsearch cluster. Connections are secured using Transport Layer Security (TLS).

Nodes that do not have encryption enabled send passwords in plain text.

To enable encryption, you need to perform the following steps on each node in the cluster:

  1. Install an X.509 certificate.
  2. Configure the node to:

    1. Identify itself using its signed certificate.
    2. Enable SSL on the transport and HTTP layers.
    3. Configure the unicast hosts the node can contact to join the cluster.
  3. Restart Elasticsearch.

Installing Node Certificates

edit

Node certificates should be signed by a certificate authority (CA) that is trusted by every node in the cluster. You can use a third-party CA, your organization’s existing CA, or set up a certificate authority specifically for signing node certificates.

When a client connects to a node using SSL/TLS, the node presents its certificate to the client and proves that it owns the private key linked with the certificate. The client then determines if the node’s certificate is valid, trusted, and matches the hostname or IP address it is trying to connect to. A node acts as a client when connecting to other nodes in the cluster, so every node must trust all of the other nodes in the cluster.

While it is technically possible to use self-signed certificates, we strongly recommend using certificates signed by a CA to establish trust between nodes. Self-signed certificates must be trusted individually, which means that each node must have every other node’s certificate installed. If you add a node to the cluster, you have to install the new node’s self-signed certificate on all of the existing nodes and restart them. When you use CA-signed certificates, the existing nodes just need to trust the CA used to sign the new node’s certificate. (You should use the same CA to sign all of your node certificates.)

To install a signed certificate, you need to:

Creating a Keystore and Generating a Certificate

edit

To create a keystore and generate a node certificate:

  1. Create a node keystore and import your CA’s certificate with Java Keytool. This configures the node to trust certificates signed by the CA. For Elasticsearch to access the keystore, it must be located under the Elasticsearch configuration directory. For example, the following command creates a keystore for node01 and and imports the CA certificate cacert.pem.

    cd CONFIG_DIR/shield
    keytool -importcert -keystore node01.jks -file cacert.pem -alias my_ca

    The Java keystore file (.jks) securely stores certificates for the node. The CA cert must be a PEM encoded certificate.

    When you create a keystore, you are prompted to set a password. This password protects the integrity of the keystore. You need to provide it whenever you interact with the keystore.

    When the CA certificate expires, you must update the node’s keystore with the new CA certificate.

    You can also store the CA certificate in a separate truststore. For more information, see Configuring a Truststore.

  2. Generate a private key and certificate for the node with Java Keytool. For example, the following command creates a key and certificate for node01:

    keytool -genkey -alias node01 -keystore node01.jks -keyalg RSA -keysize 2048 -validity 712 -ext san=dns:node01.example.com,ip:192.168.1.1

    This command creates an RSA private key with a key size of 2048 bits and a public certificate that is valid for 712 days. The key and certificate are stored in the node01.jks keystore.

    The san value specifies all alternative names for the node. The generated certificate is valid for the DNS names and IP addresses specified as alternative names. You can specify multiple DNS or IP address entries as a comma-separated list.

    Specifying the Node Identity

    With SSL/TLS is enabled, when node A connects to node B, node A normally verifies the identity of node B by checking the identity information specified in node B’s certificate. This means that you must include node identity information when you create a node’s certificate.

    The recommended way to specify the node identity when creating a certificate is to specify the -ext option and list all of the node’s names and IP addresses in the san (Subject Alternative Name) attribute.

    If you use a commercial CA, the DNS names and IP addresses used to identify a node must be publicly resolvable. Internal DNS names and private IP addresses are not accepted due to security concerns.

    If you need to use private DNS names and IP addresses, using an internal CA is the most secure option. It enables you to specify node identities and ensure node identities are verified when nodes connect. If you must use a commercial CA and private DNS names or IP addresses, you cannot include the node identity in the certificate, so the only option is to disable hostname verification.

    When you run keytool -genkey, Keytool prompts you for the information needed to populate the node’s distinguished name that’s stored the certificate. For example:

    What is your first and last name?
      [Unknown]:  Elasticsearch node01 
    What is the name of your organizational unit?
      [Unknown]:  test
    What is the name of your organization?
      [Unknown]:  Elasticsearch
    What is the name of your City or Locality?
      [Unknown]:  Amsterdam
    What is the name of your State or Province?
      [Unknown]:  Amsterdam
    What is the two-letter country code for this unit?
      [Unknown]:  NL
    Is CN=Elasticsearch node01, OU=test, O=elasticsearch, L=Amsterdam, ST=Amsterdam, C=NL correct?
      [no]:  yes
    
    Enter key password for <node01> 
        (RETURN if same as keystore password):

    Provides information about the node that this certificate is intended for. In the past, this field specified the node’s identity using a DNS name, but that behavior has been deprecated.

    If you don’t specify a password for the certificate, the keystore password is used.

    Extended Key Usage

    The Extended Key Usage attribute in a certificate is used to indicate the purpose of the key. By default keytool does not set this attribute in the certificate. If you are generating your certificates with another tool, please ensure the certificates support both serverAuth and clientAuth if the Extended Key Usage attribute is set.

Creating a Certificate Signing Request
edit

A node’s certificate needs to be signed by a trusted CA for the certificate to be trusted. To get a certificate signed, you need to create a certificate signing request (CSR) and send it to your CA.

To create a CSR with Java Keytool, use the keytool t-certreq command. You specify the same alias, keystore, key algorithm, and DNS names and IP addresses that you used when you created the node certificate. Specify where you want to store the CSR with the -file option.

keytool -certreq -alias node01 -keystore node01.jks -file node01.csr -keyalg rsa -ext san=dns:node01.example.com,ip:192.168.1.1
Send the Signing Request
edit

To get a signed certificate, send the generated CSR file to your CA. The CA will sign it and send you the signed version of the certificate.

If you are running your own CA, see Signing CSRs for signing instructions.

Install the Signed Certificate
edit

To install the signed certificate, use keytool -importcert to add it to the node’s keystore. You specify the same alias and keystore that you used when you created the node certificate.

cd CONFIG_DIR/shield
keytool -importcert -keystore node01.jks -file node01-signed.crt -alias node01

If you attempt to import a PEM-encoded certificate that contains extra text headers, you might get the error: java.security.cert.CertificateParsingException: invalid DER-encoded certificate data. Use the following openssl command to remove the extra headers and then use keytool to import the certificate.

openssl x509 -in node01-signed.crt -out node01-signed-noheaders.crt

Enabling SSL in the Node Configuration

edit

Once you have added the signed certificate to the node’s keystore, you need to modify the node configuration to enable SSL.

All SSL/TLS related node settings that are considered to be highly sensitive and therefore are not exposed via the nodes info API.

To enable SSL, make the following changes in elasticsearch.yml:

  1. Specify the location of the node’s keystore and the password(s) needed to access the node’s certificate. For example:

    shield.ssl.keystore.path:          /home/es/config/shield/node01.jks 
    shield.ssl.keystore.password:      myPass 
    shield.ssl.keystore.key_password:  myKeyPass 

    The full path to the node keystore file. This must be a location within the Elasticsearch configuration directory.

    The password used to access the keystore.

    The password used to access the certificate. This is only required if you specified a separate certificate password when generating the certificate.

    You don’t have to store your passwords in plain text in elasticsearch.yml. Specify ${prompt.secret} in place of the actual keystore and certificate passwords and Elasticsearch will prompt for them on startup. For more information, see Configuration Styles in the Elasticsearch Reference. ]

  2. Enable SSL on the transport networking layer to ensure that communication between nodes is encrypted:

    shield.transport.ssl: true

    Transport clients can only connect to the cluster with a valid username and password even if this setting is disabled.

  3. Enable SSL on the HTTP layer to ensure that communication between HTTP clients and the cluster is encrypted:

    shield.http.ssl: true

    HTTP clients can only connect to the cluster with a valid username and password even if this setting is disabled.

  4. Specify the unicast hosts the node can contact to join the cluster:

    discovery.zen.ping.unicast.hosts: ["node01:9300", "node02:9301"]
  5. Restart Elasticsearch so these configuration changes take effect.

Configuring a Separate Truststore

edit

You can store trusted CA certificates in a node’s keystore, or create a separate truststore for CA certificates.

To use a separate truststore:

  1. Create a node truststore and import the CA certificate(s) you want to trust with Java Keytool. For example, the following command imports the CA certificate cacert.pem into truststore.jks. If the specified truststore doesn’t exist, it is created.

    cd CONFIG_DIR/shield
    keytool -importcert -keystore truststore.jks -file cacert.pem

    When you create a truststore, you are prompted to set a password. This password protects the integrity of the truststore. You need to provide it whenever you interact with the truststore.

  2. In elasticsearch.yml, specify the location of the node’s truststore and the password needed to access it. For example:

    shield.ssl.truststore.path:          /home/es/config/shield/truststore.jks 
    shield.ssl.truststore.password:      myPass 

    The full path to the truststore file. This must be a location within the Elasticsearch configuration directory.

    The password needed to access the truststore.