« Automated response actions Response actions history »
Elastic Docs ›Serverless ›Elastic Security serverless ›Endpoint response actions

Isolate a host

edit

Isolate a host

edit

[preview] This functionality is in technical preview and may be changed or removed in a future release. Elastic will work to fix any issues, but features in technical preview are not subject to the support SLA of official GA features.

Host isolation allows you to isolate hosts from your network, blocking communication with other hosts on your network until you release the host. Isolating a host is useful for responding to malicious activity or preventing potential attacks, as it prevents lateral movement across other hosts.

Isolated hosts, however, can still send data to Elastic Security. You can also create host isolation exceptions for specific IP addresses that isolated hosts are still allowed to communicate with, even when blocked from the rest of your network.

Requirements

  • Host isolation requires the Endpoint Protection Complete project feature.
  • Hosts must have Elastic Agent installed with the Elastic Defend integration.

  • Host isolation is supported for endpoints running Windows, macOS, and these Linux distributions:

    • CentOS/RHEL 8
    • Debian 11
    • Ubuntu 18.04, 20.04, and 22.04
    • AWS Linux 2
  • To isolate and release hosts running any operating system, you must have the appropriate user role.
Endpoint page highlighting a host that’s been isolated

You can isolate a host from a detection alert’s details flyout, from the Endpoints page, or from the endpoint response console. Once a host is successfully isolated, an Isolated status displays next to the Agent status field, which you can view on the alert details flyout or Endpoints list table.

If the request fails, verify that the Elastic Agent and your endpoint are both online before trying again.

All actions executed on a host are tracked in the host’s response actions history, which you can access from the Endpoints page. Refer to View host isolation history for more information.

Isolate a host
edit
Isolate a host from a detection alert

  1. Open a detection alert:

    • From the Alerts table or Timeline: Click View details (View details).
    • From a case with an attached alert: Click Show alert details (>).
  2. Click Take action → Isolate host.
  3. Enter a comment describing why you’re isolating the host (optional).
  4. Click Confirm.
Isolate a host from an endpoint

  1. Go to Assets → Endpoints, then either:

    • Select the appropriate endpoint in the Endpoint column, and click Take action → Isolate host in the endpoint details flyout.
    • Click the Actions menu (…​) on the appropriate endpoint, then select Isolate host.
  2. Enter a comment describing why you’re isolating the host (optional).
  3. Click Confirm.
Isolate a host from the response console

The response console requires the Endpoint Protection Complete project feature.

  1. Open the response console for the host (select the Respond button or actions menu option on the host, endpoint, or alert details view).

  2. Enter the isolate command and an optional comment in the input area, for example:

    isolate --comment "Isolate this host"

  3. Press Return.
Automatically isolate a host using a rule’s endpoint response action

The host isolation endpoint response action requires the Endpoint Protection Complete project feature.

Be aware that automatic host isolation can result in unintended consequences, such as disrupting legitimate user activities or blocking critical business processes.

  1. Add an endpoint response action to a new or existing custom query rule. The endpoint response action will run whenever rule conditions are met:

    • New rule: On the last step of custom query rule creation, go to the Response Actions section and select Elastic Defend.
    • Existing rule: Edit the rule’s settings, then go to the Actions tab. In the tab, select Elastic Defend under the Response Actions section.
  2. Click the Response action field, then select Isolate.
  3. Enter a comment describing why you’re isolating the host (optional).
  4. To finish adding the response action, click Create & enable rule (for a new rule) or Save changes (for existing rules).

After the host is successfully isolated, an Isolated status is added to the endpoint. Active end users receive a notification that the computer has been isolated from the network:

Host isolated notification message
Release a host
edit
Release a host from a detection alert

  1. Open a detection alert:

    • From the Alerts table or Timeline: Click View details (View details).
    • From a case with an attached alert: Click Show alert details (>).
  2. From the alert details flyout, click Take action → Release host.
  3. Enter a comment describing why you’re releasing the host (optional).
  4. Click Confirm.
Release a host from an endpoint

  1. Go to Assets → Endpoints, then either:

    • Select the appropriate endpoint in the Endpoint column, and click Take action → Release host in the endpoint details flyout.
    • Click the Actions menu (…​) on the appropriate endpoint, then select Release host.
  2. Enter a comment describing why you’re releasing the host (optional).
  3. Click Confirm.
Release a host from the response console

The response console requires the Endpoint Protection Complete project feature.

  1. Open the response console for the host (select the Respond button or actions menu option on the host, endpoint, or alert details view).

  2. Enter the release command and an optional comment in the input area, for example:

    release --comment "Release this host"

  3. Press Return.

After the host is successfully released, the Isolated status is removed from the endpoint. Active end users receive a notification that the computer has been reconnected to the network:

Host released notification message
View host isolation history
edit

To confirm if a host has been successfully isolated or released, check the response actions history, which logs the response actions performed on a host.

Go to Assets → Endpoints, click an endpoint’s name, then click the Response action history tab. You can filter the information displayed in this view. Refer to Response actions history for more details.

Response actions history page UI
« Automated response actions Response actions history »