How to write a Java codec plugin

How to write a Java codec plugin

Java codecs are currently supported only for Java input and output plugins. They will not work with Ruby input or output plugins.

To develop a new Java codec for Logstash, you write a new Java class that conforms to the Logstash Java Codecs API, package it, and install it with the logstash-plugin utility. We’ll go through each of those steps.

Set up your environment

Copy the example repo

Start by copying the example codec plugin. The plugin API is currently part of the Logstash codebase so you must have a local copy of that available. You can obtain a copy of the Logstash codebase with the following git command:

git clone --branch <branch_name> --single-branch https://github.com/elastic/logstash.git <target_folder>

The branch_name should correspond to the version of Logstash containing the preferred revision of the Java plugin API.

The GA version of the Java plugin API is available in the 7.2 and later branches of the Logstash codebase.

Specify the target_folder for your local copy of the Logstash codebase. If you do not specify target_folder, it defaults to a new folder called logstash under your current folder.

Generate the .jar file

After you have obtained a copy of the appropriate revision of the Logstash codebase, you need to compile it to generate the .jar file containing the Java plugin API. From the root directory of your Logstash codebase ($LS_HOME), you can compile it with ./gradlew assemble (or gradlew.bat assemble if you’re running on Windows). This should produce the $LS_HOME/logstash-core/build/libs/logstash-core-x.y.z.jar where x, y, and z refer to the version of Logstash.

After you have successfully compiled Logstash, you need to tell your Java plugin where to find the logstash-core-x.y.z.jar file. Create a new file named gradle.properties in the root folder of your plugin project. That file should have a single line:

LOGSTASH_CORE_PATH=<target_folder>/logstash-core

where target_folder is the root folder of your local copy of the Logstash codebase.

Code the plugin

The example codec plugin decodes messages separated by a configurable delimiter and encodes messages by writing their string representation separated by a delimiter. For example, if the codec were configured with / as the delimiter, the input text event1/event2/ would be decoded into two separate events with message fields of event1 and event2, respectively. Note that this is only an example codec and does not cover all the edge cases that a production-grade codec should cover.

Let’s look at the main class in that codec filter:

@LogstashPlugin(name="java_codec_example")
public class JavaCodecExample implements Codec {

    public static final PluginConfigSpec<String> DELIMITER_CONFIG =
            PluginConfigSpec.stringSetting("delimiter", ",");

    private final String id;
    private final String delimiter;

    public JavaCodecExample(final Configuration config, final Context context) {
        this(config.get(DELIMITER_CONFIG));
    }

    private JavaCodecExample(String delimiter) {
        this.id = UUID.randomUUID().toString();
        this.delimiter = delimiter;
    }

    @Override
    public void decode(ByteBuffer byteBuffer, Consumer<Map<String, Object>> consumer) {
        // a not-production-grade delimiter decoder
        byte[] byteInput = new byte[byteBuffer.remaining()];
        byteBuffer.get(byteInput);
        if (byteInput.length > 0) {
            String input = new String(byteInput);
            String[] split = input.split(delimiter);
            for (String s : split) {
                Map<String, Object> map = new HashMap<>();
                map.put("message", s);
                consumer.accept(map);
            }
        }
    }

    @Override
    public void flush(ByteBuffer byteBuffer, Consumer<Map<String, Object>> consumer) {
        // if the codec maintains any internal state such as partially-decoded input, this
        // method should flush that state along with any additional input supplied in
        // the ByteBuffer

        decode(byteBuffer, consumer); // this is a simplistic implementation
    }

    @Override
    public void encode(Event event, OutputStream outputStream) throws IOException {
        outputStream.write((event.toString() + delimiter).getBytes(Charset.defaultCharset()));
    }

    @Override
    public Collection<PluginConfigSpec<?>> configSchema() {
        // should return a list of all configuration options for this plugin
        return Collections.singletonList(DELIMITER_CONFIG);
    }

    @Override
    public Codec cloneCodec() {
        return new JavaCodecExample(this.delimiter);
    }

    @Override
    public String getId() {
        return this.id;
    }

}

Let’s step through and examine each part of that class.

Class declaration

@LogstashPlugin(name="java_codec_example")
public class JavaCodecExample implements Codec {

Notes about the class declaration:

  • All Java plugins must be annotated with the @LogstashPlugin annotation. Additionally:

    • The name property of the annotation must be supplied and defines the name of the plugin as it will be used in the Logstash pipeline definition. For example, this codec would be referenced in the codec section of the an appropriate input or output in the Logstash pipeline defintion as codec => java_codec_example { }
    • The value of the name property must match the name of the class excluding casing and underscores.
  • The class must implement the co.elastic.logstash.api.Codec interface.
  • Java plugins may not be created in the org.logstash or co.elastic.logstash packages to prevent potential clashes with classes in Logstash itself.
Plugin settings

The snippet below contains both the setting definition and the method referencing it:

public static final PluginConfigSpec<String> DELIMITER_CONFIG =
        PluginConfigSpec.stringSetting("delimiter", ",");

@Override
public Collection<PluginConfigSpec<?>> configSchema() {
    return Collections.singletonList(DELIMITER_CONFIG);
}

The PluginConfigSpec class allows developers to specify the settings that a plugin supports complete with setting name, data type, deprecation status, required status, and default value. In this example, the delimiter setting defines the delimiter on which the codec will split events. It is not a required setting and if it is not explicitly set, its default value will be ,.

The configSchema method must return a list of all settings that the plugin supports. The Logstash execution engine will validate that all required settings are present and that no unsupported settings are present.

Constructor and initialization
private final String id;
private final String delimiter;

public JavaCodecExample(final Configuration config, final Context context) {
    this(config.get(DELIMITER_CONFIG));
}

private JavaCodecExample(String delimiter) {
    this.id = UUID.randomUUID().toString();
    this.delimiter = delimiter;
}

All Java codec plugins must have a constructor taking a Configuration and Context argument. This is the constructor that will be used to instantiate them at runtime. The retrieval and validation of all plugin settings should occur in this constructor. In this example, the delimiter to be used for delimiting events is retrieved from its setting and stored in a local variable so that it can be used later in the decode and encode methods. The codec’s ID is initialized to a random UUID (as should be done for most codecs), and a local encoder variable is initialized to encode and decode with a specified character set.

Any additional initialization may occur in the constructor as well. If there are any unrecoverable errors encountered in the configuration or initialization of the codec plugin, a descriptive exception should be thrown. The exception will be logged and will prevent Logstash from starting.

Codec methods

@Override
public void decode(ByteBuffer byteBuffer, Consumer<Map<String, Object>> consumer) {
    // a not-production-grade delimiter decoder
    byte[] byteInput = new byte[byteBuffer.remaining()];
    byteBuffer.get(byteInput);
    if (byteInput.length > 0) {
        String input = new String(byteInput);
        String[] split = input.split(delimiter);
        for (String s : split) {
            Map<String, Object> map = new HashMap<>();
            map.put("message", s);
            consumer.accept(map);
        }
    }
}

@Override
public void flush(ByteBuffer byteBuffer, Consumer<Map<String, Object>> consumer) {
    // if the codec maintains any internal state such as partially-decoded input, this
    // method should flush that state along with any additional input supplied in
    // the ByteBuffer

    decode(byteBuffer, consumer); // this is a simplistic implementation
}

@Override
public void encode(Event event, OutputStream outputStream) throws IOException {
    outputStream.write((event.toString() + delimiter).getBytes(Charset.defaultCharset()));
}

The decode, flush, and encode methods provide the core functionality of the codec. Codecs may be used by inputs to decode a sequence or stream of bytes into events or by outputs to encode events into a sequence of bytes.

The decode method decodes events from the specified ByteBuffer and passes them to the provided Consumer. The input must provide a ByteBuffer that is ready for reading with byteBuffer.position() indicating the next position to read and byteBuffer.limit() indicating the first byte in the buffer that is not safe to read. Codecs must ensure that byteBuffer.position() reflects the last-read position before returning control to the input. The input is then responsible for returning the buffer to write mode via either byteBuffer.clear() or byteBuffer.compact() before resuming writes. In the example above, the decode method simply splits the incoming byte stream on the specified delimiter. A production-grade codec such as java-line would not make the simplifying assumption that the end of the supplied byte stream corresponded with the end of an event.

Events should be constructed as instances of Map<String, Object> and pushed into the event pipeline via the Consumer<Map<String, Object>>.accept() method. To reduce allocations and GC pressure, codecs may reuse the same map instance by modifying its fields between calls to Consumer<Map<String, Object>>.accept() because the event pipeline will create events based on a copy of the map’s data.

The flush method works in coordination with the decode method to decode all remaining events from the specified ByteBuffer along with any internal state that may remain after previous calls to the decode method. As an example of internal state that a codec might maintain, consider an input stream of bytes event1/event2/event3 with a delimiter of /. Due to buffering or other reasons, the input might supply a partial stream of bytes such as event1/eve to the codec’s decode method. In this case, the codec could save the beginning three characters eve of the second event rather than assuming that the supplied byte stream ends on an event boundary. If the next call to decode supplied the nt2/ev bytes, the codec would prepend the saved eve bytes to produce the full event2 event and then save the remaining ev bytes for decoding when the remainder of the bytes for that event were supplied. A call to flush signals the codec that the supplied bytes represent the end of an event stream and all remaining bytes should be decoded to events. The flush example above is a simplistic implementation that does not maintain any state about partially-supplied byte streams across calls to decode.

The encode method encodes an event into a sequence of bytes and writes it into the specified OutputStream. Because a single codec instance is shared across all pipeline workers in the output stage of the Logstash pipeline, codecs should not retain state across calls to their encode methods.

cloneCodec method

@Override
public Codec cloneCodec() {
    return new JavaCodecExample(this.delimiter);
}

The cloneCodec method should return an identical instance of the codec with the exception of its ID. Because codecs may be stateful across calls to their decode methods, input plugins that are multi-threaded should use a separate instance of each codec via the cloneCodec method for each of their threads. Because a single codec instance is shared across all pipeline workers in the output stage of the Logstash pipeline, codecs should not retain state across calls to their encode methods. In the example above, the codec is cloned with the same delimiter but a different ID.

getId method

@Override
public String getId() {
    return id;
}

For codec plugins, the getId method should always return the id that was set at instantiation time. This is typically an UUID.

Unit tests

Lastly, but certainly not least importantly, unit tests are strongly encouraged. The example codec plugin includes an example unit test that you can use as a template for your own.

Package and deploy

Java plugins are packaged as Ruby gems for dependency management and interoperability with Ruby plugins. Once they are packaged as gems, they may be installed with the logstash-plugin utility just as Ruby plugins are. Because no knowledge of Ruby or its toolchain should be required for Java plugin development, the procedure for packaging Java plugins as Ruby gems has been automated through a custom task in the Gradle build file provided with the example Java plugins. The following sections describe how to configure and execute that packaging task as well as how to install the packaged Java plugin in Logstash.

Configuring the Gradle packaging task

The following section appears near the top of the build.gradle file supplied with the example Java plugins:

// ===========================================================================
// plugin info
// ===========================================================================
group                      'org.logstashplugins' // must match the package of the main plugin class
version                    "${file("VERSION").text.trim()}" // read from required VERSION file
description                = "Example Java filter implementation"
pluginInfo.licenses        = ['Apache-2.0'] // list of SPDX license IDs
pluginInfo.longDescription = "This gem is a Logstash plugin required to be installed on top of the Logstash core pipeline using \$LS_HOME/bin/logstash-plugin install gemname. This gem is not a stand-alone program"
pluginInfo.authors         = ['Elasticsearch']
pluginInfo.email           = ['info@elastic.co']
pluginInfo.homepage        = "http://www.elastic.co/guide/en/logstash/current/index.html"
pluginInfo.pluginType      = "filter"
pluginInfo.pluginClass     = "JavaFilterExample"
pluginInfo.pluginName      = "java_filter_example"
// ===========================================================================

You should configure the values above for your plugin.

  • The version value will be automatically read from the VERSION file in the root of your plugin’s codebase.
  • pluginInfo.pluginType should be set to one of input, filter, codec, or output.
  • pluginInfo.pluginName must match the name specified on the @LogstashPlugin annotation on the main plugin class. The Gradle packaging task will validate that and return an error if they do not match.

Running the Gradle packaging task

Several Ruby source files along with a gemspec file and a Gemfile are required to package the plugin as a Ruby gem. These Ruby files are used only for defining the Ruby gem structure or at Logstash startup time to register the Java plugin. They are not used during runtime event processing. The Gradle packaging task automatically generates all of these files based on the values configured in the section above.

You run the Gradle packaging task with the following command:

./gradlew gem

For Windows platforms: Substitute gradlew.bat for ./gradlew as appropriate in the command.

That task will produce a gem file in the root directory of your plugin’s codebase with the name logstash-{plugintype}-<pluginName>-<version>.gem

Installing the Java plugin in Logstash

After you have packaged your Java plugin as a Ruby gem, you can install it in Logstash with this command:

bin/logstash-plugin install --no-verify --local /path/to/javaPlugin.gem

For Windows platforms: Substitute backslashes for forward slashes as appropriate in the command.

Run Logstash with the Java codec plugin

To test the plugin, start Logstash with:

echo "foo,bar" | bin/logstash -e 'input { java_stdin { codec => java_codec_example } }'

The expected Logstash output (excluding initialization) with the configuration above is:

{
      "@version" => "1",
       "message" => "foo",
    "@timestamp" => yyyy-MM-ddThh:mm:ss.SSSZ,
          "host" => "<yourHostName>"
}
{
      "@version" => "1",
       "message" => "bar\n",
    "@timestamp" => yyyy-MM-ddThh:mm:ss.SSSZ,
          "host" => "<yourHostName>"
}

Feedback

If you have any feedback on Java plugin support in Logstash, please comment on our main Github issue or post in the Logstash forum.