WARNING: Version 6.1 of Elasticsearch has passed its EOL date.
This documentation is no longer being maintained and may be removed. If you are running this version, we strongly advise you to upgrade. For the latest information, see the current release documentation.
Indices Recovery
editIndices Recovery
editThe indices recovery API provides insight into on-going index shard recoveries. Recovery status may be reported for specific indices, or cluster-wide.
For example, the following command would show recovery information for the indices "index1" and "index2".
GET index1,index2/_recovery?human
To see cluster-wide recovery status simply leave out the index names.
GET /_recovery?human
Response:
{
"index1" : {
"shards" : [ {
"id" : 0,
"type" : "SNAPSHOT",
"stage" : "INDEX",
"primary" : true,
"start_time" : "2014-02-24T12:15:59.716",
"start_time_in_millis": 1393244159716,
"stop_time" : "0s",
"stop_time_in_millis" : 0,
"total_time" : "2.9m",
"total_time_in_millis" : 175576,
"source" : {
"repository" : "my_repository",
"snapshot" : "my_snapshot",
"index" : "index1",
"version" : "{version}"
},
"target" : {
"id" : "ryqJ5lO5S4-lSFbGntkEkg",
"host" : "my.fqdn",
"transport_address" : "my.fqdn",
"ip" : "10.0.1.7",
"name" : "my_es_node"
},
"index" : {
"size" : {
"total" : "75.4mb",
"total_in_bytes" : 79063092,
"reused" : "0b",
"reused_in_bytes" : 0,
"recovered" : "65.7mb",
"recovered_in_bytes" : 68891939,
"percent" : "87.1%"
},
"files" : {
"total" : 73,
"reused" : 0,
"recovered" : 69,
"percent" : "94.5%"
},
"total_time" : "0s",
"total_time_in_millis" : 0,
"source_throttle_time" : "0s",
"source_throttle_time_in_millis" : 0,
"target_throttle_time" : "0s",
"target_throttle_time_in_millis" : 0
},
"translog" : {
"recovered" : 0,
"total" : 0,
"percent" : "100.0%",
"total_on_start" : 0,
"total_time" : "0s",
"total_time_in_millis" : 0,
},
"verify_index" : {
"check_index_time" : "0s",
"check_index_time_in_millis" : 0,
"total_time" : "0s",
"total_time_in_millis" : 0
}
} ]
}
}
The above response shows a single index recovering a single shard. In this case, the source of the recovery is a snapshot repository and the target of the recovery is the node with name "my_es_node".
Additionally, the output shows the number and percent of files recovered, as well as the number and percent of bytes recovered.
In some cases a higher level of detail may be preferable. Setting "detailed=true" will present a list of physical files in recovery.
GET _recovery?human&detailed=true
Response:
{
"index1" : {
"shards" : [ {
"id" : 0,
"type" : "STORE",
"stage" : "DONE",
"primary" : true,
"start_time" : "2014-02-24T12:38:06.349",
"start_time_in_millis" : "1393245486349",
"stop_time" : "2014-02-24T12:38:08.464",
"stop_time_in_millis" : "1393245488464",
"total_time" : "2.1s",
"total_time_in_millis" : 2115,
"source" : {
"id" : "RGMdRc-yQWWKIBM4DGvwqQ",
"host" : "my.fqdn",
"transport_address" : "my.fqdn",
"ip" : "10.0.1.7",
"name" : "my_es_node"
},
"target" : {
"id" : "RGMdRc-yQWWKIBM4DGvwqQ",
"host" : "my.fqdn",
"transport_address" : "my.fqdn",
"ip" : "10.0.1.7",
"name" : "my_es_node"
},
"index" : {
"size" : {
"total" : "24.7mb",
"total_in_bytes" : 26001617,
"reused" : "24.7mb",
"reused_in_bytes" : 26001617,
"recovered" : "0b",
"recovered_in_bytes" : 0,
"percent" : "100.0%"
},
"files" : {
"total" : 26,
"reused" : 26,
"recovered" : 0,
"percent" : "100.0%",
"details" : [ {
"name" : "segments.gen",
"length" : 20,
"recovered" : 20
}, {
"name" : "_0.cfs",
"length" : 135306,
"recovered" : 135306
}, {
"name" : "segments_2",
"length" : 251,
"recovered" : 251
}
]
},
"total_time" : "2ms",
"total_time_in_millis" : 2,
"source_throttle_time" : "0s",
"source_throttle_time_in_millis" : 0,
"target_throttle_time" : "0s",
"target_throttle_time_in_millis" : 0
},
"translog" : {
"recovered" : 71,
"total" : 0,
"percent" : "100.0%",
"total_on_start" : 0,
"total_time" : "2.0s",
"total_time_in_millis" : 2025
},
"verify_index" : {
"check_index_time" : 0,
"check_index_time_in_millis" : 0,
"total_time" : "88ms",
"total_time_in_millis" : 88
}
} ]
}
}
This response shows a detailed listing (truncated for brevity) of the actual files recovered and their sizes.
Also shown are the timings in milliseconds of the various stages of recovery: index retrieval, translog replay, and index start time.
Note that the above listing indicates that the recovery is in stage "done". All recoveries, whether on-going or complete, are kept in cluster state and may be reported on at any time. Setting "active_only=true" will cause only on-going recoveries to be reported.
Here is a complete list of options:
|
|
Display a detailed view. This is primarily useful for viewing the recovery of physical index files. Default: false. |
|
|
Display only those recoveries that are currently on-going. Default: false. |
Description of output fields:
|
|
Shard ID |
|
|
Recovery type:
|
|
|
Recovery stage:
|
|
|
True if shard is primary, false otherwise |
|
|
Timestamp of recovery start |
|
|
Timestamp of recovery finish |
|
|
Total time to recover shard in milliseconds |
|
|
Recovery source:
|
|
|
Destination node |
|
|
Statistics about physical index recovery |
|
|
Statistics about translog recovery |
|
|
Statistics about time to open and start the index |