Moving Average Aggregation

A moving_avg aggregation looks like this in isolation:

{
    "moving_avg": {
        "buckets_path": "the_sum",
        "model": "holt",
        "window": 5,
        "gap_policy": "insert_zeros",
        "settings": {
            "alpha": 0.8
        }
    }
}

moving_avg aggregations must be embedded inside of a histogram or date_histogram aggregation. They can be embedded like any other metric aggregation:

POST /_search
{
    "size": 0,
    "aggs": {
        "my_date_histo":{                
            "date_histogram":{
                "field":"date",
                "interval":"1M"
            },
            "aggs":{
                "the_sum":{
                    "sum":{ "field": "price" } 
                },
                "the_movavg":{
                    "moving_avg":{ "buckets_path": "the_sum" } 
                }
            }
        }
    }
}

Moving averages are built by first specifying a histogram or date_histogram over a field. You can then optionally add normal metrics, such as a sum, inside of that histogram. Finally, the moving_avg is embedded inside the histogram. The buckets_path parameter is then used to "point" at one of the sibling metrics inside of the histogram (see buckets_path Syntax for a description of the syntax for buckets_path.

An example response from the above aggregation may look like:

{
   "took": 11,
   "timed_out": false,
   "_shards": ...,
   "hits": ...,
   "aggregations": {
      "my_date_histo": {
         "buckets": [
             {
                 "key_as_string": "2015/01/01 00:00:00",
                 "key": 1420070400000,
                 "doc_count": 3,
                 "the_sum": {
                    "value": 550.0
                 }
             },
             {
                 "key_as_string": "2015/02/01 00:00:00",
                 "key": 1422748800000,
                 "doc_count": 2,
                 "the_sum": {
                    "value": 60.0
                 },
                 "the_movavg": {
                    "value": 550.0
                 }
             },
             {
                 "key_as_string": "2015/03/01 00:00:00",
                 "key": 1425168000000,
                 "doc_count": 2,
                 "the_sum": {
                    "value": 375.0
                 },
                 "the_movavg": {
                    "value": 305.0
                 }
             }
         ]
      }
   }
}

The moving_avg aggregation includes four different moving average "models". The main difference is how the values in the window are weighted. As data-points become "older" in the window, they may be weighted differently. This will affect the final average for that window.

Models are specified using the model parameter. Some models may have optional configurations which are specified inside the settings parameter.

Simple

edit

The simple model calculates the sum of all values in the window, then divides by the size of the window. It is effectively a simple arithmetic mean of the window. The simple model does not perform any time-dependent weighting, which means the values from a simple moving average tend to "lag" behind the real data.

POST /_search
{
    "size": 0,
    "aggs": {
        "my_date_histo":{
            "date_histogram":{
                "field":"date",
                "interval":"1M"
            },
            "aggs":{
                "the_sum":{
                    "sum":{ "field": "price" }
                },
                "the_movavg":{
                    "moving_avg":{
                        "buckets_path": "the_sum",
                        "window" : 30,
                        "model" : "simple"
                    }
                }
            }
        }
    }
}

A simple model has no special settings to configure

The window size can change the behavior of the moving average. For example, a small window ("window": 10) will closely track the data and only smooth out small scale fluctuations:

Figure 1. Moving average with window of size 10

In contrast, a simple moving average with larger window ("window": 100) will smooth out all higher-frequency fluctuations, leaving only low-frequency, long term trends. It also tends to "lag" behind the actual data by a substantial amount:

Figure 2. Moving average with window of size 100

The linear model assigns a linear weighting to points in the series, such that "older" datapoints (e.g. those at the beginning of the window) contribute a linearly less amount to the total average. The linear weighting helps reduce the "lag" behind the data’s mean, since older points have less influence.

POST /_search
{
    "size": 0,
    "aggs": {
        "my_date_histo":{
            "date_histogram":{
                "field":"date",
                "interval":"1M"
            },
            "aggs":{
                "the_sum":{
                    "sum":{ "field": "price" }
                },
                "the_movavg": {
                    "moving_avg":{
                        "buckets_path": "the_sum",
                        "window" : 30,
                        "model" : "linear"
                    }
                }
            }
        }
    }
}

A linear model has no special settings to configure

Like the simple model, window size can change the behavior of the moving average. For example, a small window ("window": 10) will closely track the data and only smooth out small scale fluctuations:

Figure 3. Linear moving average with window of size 10

In contrast, a linear moving average with larger window ("window": 100) will smooth out all higher-frequency fluctuations, leaving only low-frequency, long term trends. It also tends to "lag" behind the actual data by a substantial amount, although typically less than the simple model:

Figure 4. Linear moving average with window of size 100

The ewma model (aka "single-exponential") is similar to the linear model, except older data-points become exponentially less important, rather than linearly less important. The speed at which the importance decays can be controlled with an alpha setting. Small values make the weight decay slowly, which provides greater smoothing and takes into account a larger portion of the window. Larger valuers make the weight decay quickly, which reduces the impact of older values on the moving average. This tends to make the moving average track the data more closely but with less smoothing.

The default value of alpha is 0.3, and the setting accepts any float from 0-1 inclusive.

The EWMA model can be Minimized

POST /_search
{
    "size": 0,
    "aggs": {
        "my_date_histo":{
            "date_histogram":{
                "field":"date",
                "interval":"1M"
            },
            "aggs":{
                "the_sum":{
                    "sum":{ "field": "price" }
                },
                "the_movavg": {
                    "moving_avg":{
                        "buckets_path": "the_sum",
                        "window" : 30,
                        "model" : "ewma",
                        "settings" : {
                            "alpha" : 0.5
                        }
                    }
                }
            }
        }
    }
}

Figure 5. EWMA with window of size 10, alpha = 0.2

Figure 6. EWMA with window of size 10, alpha = 0.7

The holt model (aka "double exponential") incorporates a second exponential term which tracks the data’s trend. Single exponential does not perform well when the data has an underlying linear trend. The double exponential model calculates two values internally: a "level" and a "trend".

The level calculation is similar to ewma, and is an exponentially weighted view of the data. The difference is that the previously smoothed value is used instead of the raw value, which allows it to stay close to the original series. The trend calculation looks at the difference between the current and last value (e.g. the slope, or trend, of the smoothed data). The trend value is also exponentially weighted.

Values are produced by multiplying the level and trend components.

The default value of alpha is 0.3 and beta is 0.1. The settings accept any float from 0-1 inclusive.

The Holt-Linear model can be Minimized

POST /_search
{
    "size": 0,
    "aggs": {
        "my_date_histo":{
            "date_histogram":{
                "field":"date",
                "interval":"1M"
            },
            "aggs":{
                "the_sum":{
                    "sum":{ "field": "price" }
                },
                "the_movavg": {
                    "moving_avg":{
                        "buckets_path": "the_sum",
                        "window" : 30,
                        "model" : "holt",
                        "settings" : {
                            "alpha" : 0.5,
                            "beta" : 0.5
                        }
                    }
                }
            }
        }
    }
}

In practice, the alpha value behaves very similarly in holt as ewma: small values produce more smoothing and more lag, while larger values produce closer tracking and less lag. The value of beta is often difficult to see. Small values emphasize long-term trends (such as a constant linear trend in the whole series), while larger values emphasize short-term trends. This will become more apparently when you are predicting values.

Figure 7. Holt-Linear moving average with window of size 100, alpha = 0.5, beta = 0.2

Figure 8. Holt-Linear moving average with window of size 100, alpha = 0.5, beta = 0.7

The holt_winters model (aka "triple exponential") incorporates a third exponential term which tracks the seasonal aspect of your data. This aggregation therefore smooths based on three components: "level", "trend" and "seasonality".

The level and trend calculation is identical to holt The seasonal calculation looks at the difference between the current point, and the point one period earlier.

Holt-Winters requires a little more handholding than the other moving averages. You need to specify the "periodicity" of your data: e.g. if your data has cyclic trends every 7 days, you would set period: 7. Similarly if there was a monthly trend, you would set it to 30. There is currently no periodicity detection, although that is planned for future enhancements.

There are two varieties of Holt-Winters: additive and multiplicative.

"Cold Start"

edit

Unfortunately, due to the nature of Holt-Winters, it requires two periods of data to "bootstrap" the algorithm. This means that your window must always be at least twice the size of your period. An exception will be thrown if it isn’t. It also means that Holt-Winters will not emit a value for the first 2 * period buckets; the current algorithm does not backcast.

Figure 9. Holt-Winters showing a "cold" start where no values are emitted

Because the "cold start" obscures what the moving average looks like, the rest of the Holt-Winters images are truncated to not show the "cold start". Just be aware this will always be present at the beginning of your moving averages!

Additive Holt-Winters

edit

Additive seasonality is the default; it can also be specified by setting "type": "add". This variety is preferred when the seasonal affect is additive to your data. E.g. you could simply subtract the seasonal effect to "de-seasonalize" your data into a flat trend.

The default values of alpha and gamma are 0.3 while beta is 0.1. The settings accept any float from 0-1 inclusive. The default value of period is 1.

The additive Holt-Winters model can be Minimized

POST /_search
{
    "size": 0,
    "aggs": {
        "my_date_histo":{
            "date_histogram":{
                "field":"date",
                "interval":"1M"
            },
            "aggs":{
                "the_sum":{
                    "sum":{ "field": "price" }
                },
                "the_movavg": {
                    "moving_avg":{
                        "buckets_path": "the_sum",
                        "window" : 30,
                        "model" : "holt_winters",
                        "settings" : {
                            "type" : "add",
                            "alpha" : 0.5,
                            "beta" : 0.5,
                            "gamma" : 0.5,
                            "period" : 7
                        }
                    }
                }
            }
        }
    }
}

Figure 10. Holt-Winters moving average with window of size 120, alpha = 0.5, beta = 0.7, gamma = 0.3, period = 30

POST /_search
{
    "size": 0,
    "aggs": {
        "my_date_histo":{
            "date_histogram":{
                "field":"date",
                "interval":"1M"
            },
            "aggs":{
                "the_sum":{
                    "sum":{ "field": "price" }
                },
                "the_movavg": {
                    "moving_avg":{
                        "buckets_path": "the_sum",
                        "window" : 30,
                        "model" : "holt_winters",
                        "settings" : {
                            "type" : "mult",
                            "alpha" : 0.5,
                            "beta" : 0.5,
                            "gamma" : 0.5,
                            "period" : 7,
                            "pad" : true
                        }
                    }
                }
            }
        }
    }
}

All the moving average model support a "prediction" mode, which will attempt to extrapolate into the future given the current smoothed, moving average. Depending on the model and parameter, these predictions may or may not be accurate.

Predictions are enabled by adding a predict parameter to any moving average aggregation, specifying the number of predictions you would like appended to the end of the series. These predictions will be spaced out at the same interval as your buckets:

POST /_search
{
    "size": 0,
    "aggs": {
        "my_date_histo":{
            "date_histogram":{
                "field":"date",
                "interval":"1M"
            },
            "aggs":{
                "the_sum":{
                    "sum":{ "field": "price" }
                },
                "the_movavg": {
                    "moving_avg":{
                        "buckets_path": "the_sum",
                        "window" : 30,
                        "model" : "simple",
                        "predict" : 10
                    }
                }
            }
        }
    }
}

The simple, linear and ewma models all produce "flat" predictions: they essentially converge on the mean of the last value in the series, producing a flat:

Figure 11. Simple moving average with window of size 10, predict = 50

In contrast, the holt model can extrapolate based on local or global constant trends. If we set a high beta value, we can extrapolate based on local constant trends (in this case the predictions head down, because the data at the end of the series was heading in a downward direction):

Figure 12. Holt-Linear moving average with window of size 100, predict = 20, alpha = 0.5, beta = 0.8

In contrast, if we choose a small beta, the predictions are based on the global constant trend. In this series, the global trend is slightly positive, so the prediction makes a sharp u-turn and begins a positive slope:

Figure 13. Double Exponential moving average with window of size 100, predict = 20, alpha = 0.5, beta = 0.1

The holt_winters model has the potential to deliver the best predictions, since it also incorporates seasonal fluctuations into the model:

Figure 14. Holt-Winters moving average with window of size 120, predict = 25, alpha = 0.8, beta = 0.2, gamma = 0.7, period = 30

Some of the models (EWMA, Holt-Linear, Holt-Winters) require one or more parameters to be configured. Parameter choice can be tricky and sometimes non-intuitive. Furthermore, small deviations in these parameters can sometimes have a drastic effect on the output moving average.

For that reason, the three "tunable" models can be algorithmically minimized. Minimization is a process where parameters are tweaked until the predictions generated by the model closely match the output data. Minimization is not fullproof and can be susceptible to overfitting, but it often gives better results than hand-tuning.

Minimization is disabled by default for ewma and holt_linear, while it is enabled by default for holt_winters. Minimization is most useful with Holt-Winters, since it helps improve the accuracy of the predictions. EWMA and Holt-Linear are not great predictors, and mostly used for smoothing data, so minimization is less useful on those models.

Minimization is enabled/disabled via the minimize parameter:

POST /_search
{
    "size": 0,
    "aggs": {
        "my_date_histo":{
            "date_histogram":{
                "field":"date",
                "interval":"1M"
            },
            "aggs":{
                "the_sum":{
                    "sum":{ "field": "price" }
                },
                "the_movavg": {
                    "moving_avg":{
                        "buckets_path": "the_sum",
                        "model" : "holt_winters",
                        "window" : 30,
                        "minimize" : true,  
                        "settings" : {
                            "period" : 7
                        }
                    }
                }
            }
        }
    }
}

When enabled, minimization will find the optimal values for alpha, beta and gamma. The user should still provide appropriate values for window, period and type.